- Vinyl is suitable for applications requiring frequent changing
- Smooth surface on the palm and fingers for tactile sensitivity
- Glove is produced without the use of Bis(2-ethylhexyl)phthalate (DEHP)
- Palm thickness is 3.1 mils and finger thickness is 2.0 mils, and standard length glove is 9.1" long and has a beaded wrist cuff that is 2.0 mils thick
- Powder-free glove leaves no residue, helping to reduce the risk of spreading bacteria compared to a powdered glove
0 items added
To add items, choose from the table below
Microflex Derma Free Vinyl Glove, Powder Free, 9.1" Length, 3.1 mils Thick
|Price:||$9.51 - $910.80|
|Additional Features||Powder Free , Disposable|
|Manufacturer Series Number||Derma Free|
|Overall Length||9.1 inches|
The Microflex Derma Free disposable, powder-free, standard length vinyl gl... See more product details
Customers Who Viewed This Item Also Viewed
Special Offers and Product Promotions
The Microflex Derma Free disposable, powder-free, standard length vinyl glove has a smooth surface on the palm and fingers and is produced without the use of Bis(2-ethylhexyl)phthalate (DEHP). It has a palm thickness of 3.1 mils and a finger thickness of 2.0 mils, and is 9.1" long from the tip of the middle finger to the edge of the beaded wrist cuff, which is 2.0 mils thick. It is suitable for automotive, dental, emergency medical services, healthcare, industrial safety, and laboratory applications. Vinyl is suitable for applications requiring frequent changing and helps reduce the likelihood of allergic reaction, but is not suitable for use in wet environments or when exposed to abrasion, chemicals, and high temperatures. The glove has a smooth surface on the palm and fingers for tactile sensitivity. This powder-free glove leaves no residue, helping to reduce the risk of spreading bacteria compared to a powdered glove. The color of this ambidextrous glove is clear.
Tensile strength, measured in megapascals (MPa), is the amount of force required to rip a glove; the higher the number, the stronger the glove material. This glove has a tensile strength of 13 MPa before and after aging. Elongation measures how much a glove can be stretched before it breaks. It is expressed as a percent of the original length of the glove at the moment of breakage, and the higher the percent, the more the glove can stretch. This glove has an elongation of 300% before and after aging. Acceptable Quality Level (AQL) is a Food and Drug Administration (FDA) quality specification for the defect rate in surgical and exam gloves. The FDA requires an AQL of 1.5 for surgical gloves and 2.5 for exam gloves. This glove has an AQL of 1.5, which means the defect level from a large sample of the gloves will not exceed 1.5%. Microflex examination gloves meet or exceed applicable standards imposed by ASTM International, formerly known as the American Society for Testing and Materials (ASTM), and the FDA.
Disposable and limited-use gloves are used in medical, forensic, scientific, art, and industrial applications. Gloves are commonly made from flexible materials such as latex, nitrile, chloroprene, and vinyl. While most disposable gloves are designed for either hand, some can be purchased in hand-specific models. They are offered powdered or powder-free; silicone or silicone-free; chlorinated or non-chlorinated; coated or uncoated; with a standard- or extended-length cuff; sterile or non-sterile; and with textured or smooth fingers, fingertips, and palms. A glove's abrasion, cut, and puncture resistance is defined by glove material and thickness, and may be improved with the use of certain exterior coatings. Abrasion resistance means the glove helps protect the hand from contact with rough objects. Cut resistance means the glove helps protect the hand from blades and sharp instruments. Puncture resistance means the glove helps protect the hand from pointed objects such as pins and needles. Chemical resistance means the glove helps protect the hand from certain chemicals. Chemical resistance is defined by glove material, thickness, and length, as well as the work environment and chemicals likely to be encountered.
Microflex Corporation manufactures disposable gloves. The company, founded in 1988 and headquartered in Reno, NV, meets International Organization for Standardization (ISO) 13485:2003.
Top Customer Reviews
Most Recent Customer Reviews
I have used these gloves for years and I really like them. They are consistent in their quality box to box and protect my hands from paint, glue and other hobby liquids. Read morePublished 23 months ago by Edward H. Bell
The boxes that I ordered is purple and white, that say "LIGHTLY POWDERED" VINYL, XS. Can somebody say, "OOOPS, I put the wrong tag on the box."Published on August 22, 2013 by Steph
latex. I used these gloves frequently from cleaning the bathroom to cooking in the kitchen. Only con for these gloves is the price has double since I purchased my box.Published on November 1, 2011 by Joe496
I got these for medical use to replace latex. But they are kinda loose. I bought the size according to the chart. I think I'm going to stick with nitrile. Read morePublished on April 1, 2010 by D