MIL907405 Features: -Miller Millermatic 212 Auto-Set is two machines in one! The new Auto-Set mode automatically sets your weld parameters while the Manual Mode allows the user to set the parameters for broader applications. Infinate voltage control, Line Voltage Compensation and Fan-On-Demant make this an extremely versatile machine. The compatiblity with the Spoolmatic 15A/30A spool gun with wirefeed speed control on the gun saves time for the operator by elminating the need to go back to the machine to change the speed.. -UNSPC CODE: 23271400. Product Type: -Mig welders. Duty Cycle Percentage: -60%. Maximum Voltage: -230 Volts. Output Amperage: -30 Amps. Generic Specifications: -60HZ 1PH. -Auto-Set is a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set makes set up very simple and gives you precise settings instantly. Infinite voltage control replaces ''''tap'''' settings which means that you now can ''''dial in'''' precise weld voltage and wirefeed speed when using the Manual Mode. LVC Line Voltage Compensation - Keeps output of the power source constant regardless of fluctuation in input power +/- 10%. Fan-On-Demand - Operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine. Patent-pending EZ-Change Low Cylinder Rack allows operators to easily roll cylinders on and off of rack no need to lift cylinders. New! EZ-Access Comsumable Compartment and Parameter Chart - convenient new flipdown compartment that provides fast access to parameter chart and consumables. Compatible with Spoolmatic 15A/30A spool gun! The Spoolmatic 15A/30A with wirefeed speed control on the gun saves time for the operator by eliminating the need to go back to the machine to change the spool gun wirefeed speed.. -MILLERMATIC 212 AUTOSET 200/230V.