All-in-one wire welder that welds material from 22 gauge to 3/8 in. thick in a single pass.
A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set makes set up very simple and gives you precise settings instantly.
Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.
Standard Built-In Solid-State Contactor Circuit
Makes wire electrically "cold" until trigger is pulled. This makes unit safer and torch easier to position before starting to weld.
EZ-ChangeTM Low Cylinder Rack
Allows users to easily roll cylinders on and off of rack - no need to lift cylinders.
Compatible with Spoolmate 200 Series Spool Gun!
The Spoolmate 200 saves time for the operator by eliminating the need to go back to the machine to change wirefeed speed.
Line Voltage Compensation
Keeps welding output constant even if power input varies by +/- 10%.
Reduce Maintenance and Operating Costs
Our Fan-On-DemandTM cooling system only operates when needed, reducing power consumption and contaminants drawn into the machine.
Larger Work Area
Now with longer 15-ft M-25 MIG gun!
Rated Output: 160 A, 24.5 VDC at 60% Duty Cycle, 210 A, 22 VDC at 30% Duty Cycle
Amperage Range: 30 -210 A
Max. Open-Circuit Voltage: 34.5
Amps Input at Rated Output, 60 Hz
200 (208) V 230 V KVA KW
31.2, 27.1. 6.36. 5.45
2.1*, 1.8*, 0.51*, 0.26*
Wire Type and Diameter Solid/Stainless Steel: .023-.035 in (0.6 - 0.9 mm)
Flux Cored: .030 - .045 in (0.8 - 1.2 mm)
Wire Feed Speed: 50-700 IPM (1.3-17.8 m/min)
Max. Spool Size: 12 in (305 mm)
Dimensions: H: 30 in (762 mm), W: 19 in (483 mm). D: 40 in (1016 mm)
Net Weight: 178 lb (81 kg)