Milwaukee 0516-22 14.4 Volt 1/2-Inch Driver/Drill 0-450/1450 RPM, T-Handle with Two Batteries, Charger & Case

by Milwaukee

Product Description

Amazon.com Review

The Power Plus battery pack is one of the highlights of Milwaukee's 14.4-volt cordless drill. The battery is reversible, which helps balance the tool for the user and also makes it easier to get into tight spots. The adjustable clutch is easy to use and gives you two speed ranges to choose from: low gear for more power (maximum: 390 inch-pounds of torque) when driving screws and high gear for more speed when drilling. There are also 20 different super precise clutch positions so you can match the torque to the application, minimizing the risk of stripping screws or breaking off heads. The thin, soft-grip handle seems to absorb some of the vibrations, making the drill comfortable both to hold and use. The 1/2-inch keyless chuck is a bonus feature, holding a larger bit than most of the 3/8-inch competition in the 14.4 market. The forward/reverse function takes some getting used to: it's a switch, as opposed to the more common two-sided buttons you find on most other brands, and depending on hand size can be a bit tricky to reach with your trigger hand. This is a great tool for either the professional or the serious do-it-yourselfer. Excellent work, Milwaukee. --Dori Anvinson

From the Manufacturer

With two 2.4 amp-hr batteries for long run time, an all metal 1/2-inch chuck for extreme durability and 390 in/lbs. of torque to drive large bits with authority this tool is second to none. The 0516-20, 14.4-volt T-handle driver/drill has a reversible battery for working in tight spaces and better balance for overhead work. With 390 in/lbs. of torque and 20 different clutch positions this tool is ideal for use as a drill or screwdriver. Drill or screw into wood, metal, composites, drywall and other materials. The soft grip reduces pressure points and absorbs tool vibrations. The T-handle design provides optimum balance and comfort. Milwaukee products have a limited warranty, 30-day no-risk trial. The 0516-20 comes with the driver/drill, two batteries, one hour charger, and case.

Product Details

Product Manual [1.86mb PDF]

• Shipping Weight: 13.4 pounds
• Shipping: This item is also available for shipping to select countries outside the U.S.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B00004TRAH
• Item model number: 0516-22
• Average Customer Review: 4.4 out of 5 stars  See all reviews (26 customer reviews)
• Amazon Best Sellers Rank: #485,074 in Home Improvement (See Top 100 in Home Improvement)
• Discontinued by manufacturer: Yes

Customer Reviews

Most Helpful Customer Reviews

74 of 74 people found the following review helpful:

5.0 out of 5 stars The Wrist Twister, December 30, 2000

By 

James E. Thompson (PORT TOWNSEND, WA United States) - See all my reviews

This review is from: Milwaukee 0516-22 14.4 Volt 1/2-Inch Driver/Drill 0-450/1450 RPM, T-Handle with Two Batteries, Charger & Case (Tools & Home Improvement)

I have spent a lot of time looking at and comparing cordless drills. I spoke to people who sold them. I spoke with the companies tech departments to get their views. I also spoke to independent service establishments who repaired them. It came down to the Dewalt 990K-2 and the Milwaukee 0516-22. Both companies have been around a long time. The price was the same, and the motors are identical. Johnson makes them both. No difference there. They both have 14.4 volts. Milwaukee's is a 2.4 Ah battery; while the Dewalt is a 2.0 Ah.....Milwaukee has a longer run time. They both have keyless chucks. Dewalt has a plastic covering. This eventually wears out when forced to rub in tight places. Milwaukee's is all metal. The independent repair place said he replaces a lot of chucks on the Dewalt. None on the Milwaukee. Next is torque. In an independent test according to a Milwaukee service tech stated the Dewalt drills more holes, but the Milwaukee drives more screws.....this is because of the higher torque....Dewalt @ 334 and Milwaukee @ 390. So there, it depends on how you use your drill. I personally use it to drive screws, but was impressed how well it drilled holes. Then finally there is warranty. Dewalt has 1 year, whereas the Milwaukee has a limited lifetime warranty. I have never owned a Milwaukee tool before, but have seen many professionals use them. More than the Dewalt. I used my drill for the first time this week installing a garage door opener....drilling holes, driving screws and driving lag bolts. The torque in this drill is amazing! It has as much as some electric drills I've used. It almost twisted my wrist off putting in some lag bolts. Surprisingly impressive! There is a comparison section in Amazon.com's site of these and other cordless drills by Hanley-Wood's Tools of the Trade Magazine. They favored the Dewalt. However, if you look at the comparison, it wasn't fair. The Milwaukee drill was less money and was also a lesser quality drill. Furthermore, you should read the customer reviews in Amazon.com. Of the two drills, you will see that the Dewalt isn't rated as high. If you are thinking of what accessories to buy, you may wish to consider a speedlock set. This is a great idea if you hate to change bits all the time like I do....even if it is a keyless chuck. I bought a speed lock set from Sears......101 pieces. It has almost all the bits/sockets needed to do most jobs. There are also some duplicates in the set so in case you loose or break one on site. I looked at the Dewalt set, far fewer pieces and less money, but here again, Dewalt has a 1-year warranty while Sears has a lifetime on its hand tools. You get what you pay for in tools. I don't know about you, but I want to get the best tool for the money. Milwaukee is THE brand to buy.

37 of 38 people found the following review helpful:

4.0 out of 5 stars Probably the best out there, for now, August 13, 2001

By 

Todd J. Niblo (Portsmouth, VA USA) - See all my reviews

This review is from: Milwaukee 0516-22 14.4 Volt 1/2-Inch Driver/Drill 0-450/1450 RPM, T-Handle with Two Batteries, Charger & Case (Tools & Home Improvement)

I am a contractor and purchased these drills to install about 2000 lineal feet of metal fascia and soffit panels for a school rehab project. Generally, our company scoffs at cordless drills because of the types of demands our work places on tools. This job had to be completed largely after hours and on weekends due to our workload, and the school was locked up. I did alot of research, talked with our local service center, and decided on Milwaukee. We use their corded drill motors alot, and I believe they are the best available. These cordless drills did well too. Comparatively, the tool itself built in Germany. It is smooth and strong. The chuck is all metal, so it takes the abuse around metal and masonry without destroying the chuck, and the serrations on the chuck are not raised to the extent that they are likely to damge wood, plastics . . . . a definite plus as chuck replacemnts are not cheap, nor is replacing other trades' work. Next, the 2.4 amp/hours vs. the others - very simply the higher the value the longer the run time between charges, Milwaukee has everyone beat right now. These drills ran 2" self drilling screws into 18 gage metal studs through gypsum board an average of 5 hours on one battery. The chargers seem fine, they shut down automatically so as not to overheat or overcharge the battery, and the ones that come in this kit kit work on all Milwaukee batteries from 9.6v through 18v. The difference in weight between 14.4 volt models is fairly neglible. The BOSCH is the lightest in its class, but it is only rated for 2.0 amp hours, giving the Milwaukee 20%longer run time on the same charge. Replacement costs are similar. Regarding the warranty, Milwaukee sets the standard here - limited lifetime warranty V. 30 days to 1 year. Milwaukee also offers a 30 day no risk trial, if you decide against it. In speaking to the service center, most cordless drills utilize the same Johnson motors, so the difference here is not appreciable, the cluthces, switches, housing, chucks and bnattery technology is where they separate themselves. In general, DeWalt among the major players anyway seem to be the most problematic, they offer replacable brushes, which sounds good, but the service center said that DeWalts tend to burn them more quickly than others, and it is cheaper to replace brushes than drills. Swithces are also weak in the DeWalts, no problems with Porter Cable, BOSCH or Milwaukee. Ergonomics are best on the Porter Cable or Bosch in my hands, the Milwaukee wore off a couple layers of skin between my thumb and index finger after days of hard use. Likely no problem with less hours of usage. The Porter Cables are built in Taiwan, the Bosch are built here in the States. The Porter Cables are a great buy, but labor is cheaper in Taiwan. So some of the differnces are easy to figure. So all in all, it still boils down to preference. Bosch makes great tools, I likely would have gone with Bosch because I already own their 9.6v 3105k kits and love them for light jobs and the chargers would be compatible, the price was similar to Milwaukee, but the run time was a factor for us. I do not think think that Porter Cables "overseas" tools are as high of quality (nor do the service centers) as the ones they still build in the States, and that bothered me about the Porter Cable. I never considered Makita or Panasonic, because they both use Metal Hydride battery packs and the service center says that for now stay away from those. Which left DeWalt, which has distinct shortcomings and Milwaukee, which so far - has none to speak of. Good job Milwaukee.

19 of 20 people found the following review helpful:

5.0 out of 5 stars Great Drill, April 24, 2001

By 

K. A. Young "youngka" (CO) - See all my reviews
(REAL NAME)   

Amazon Verified Purchase

This review is from: Milwaukee 0516-22 14.4 Volt 1/2-Inch Driver/Drill 0-450/1450 RPM, T-Handle with Two Batteries, Charger & Case (Tools & Home Improvement)

After months of research and some demoing at local hardware stores, I narrowed my selection to this drill and the Porter-Cable 14.4V 3/8" drill (see my review for that drill).

I didn't want anything less than 14.4V, due to power loss. I didn't want anything larger than 14.4V, due to cost and weight.

The Porter-Cable and Milwaukee were great on paper and worked well when I demoed them. The DeWalt equivalent models were as expensive as the Milwaukee, but didn't have as good a track record. Also had an inferior chuck and warranty. The Makita was not as aesthetically pleasing to me and I couldn't find one to demo.

The Milwaukee drill offers some key advantages over the PC: longer battery life, more torque, lifetime warranty, all-metal chuck, more rugged construction overall, made in Germany vs Taiwan, better grip (able to operate forward/reverse switch with one hand), better balance (see below), and a 1/2" chuck.

The PC drill offers a better case (the molding is far superior than that found in the Milwaukee) and much lower price tag. The PC case hugs the drill perfectly. The Milwaukee case allows for some movement, not a big deal but I like a good case.

Since I'm just a weekend warrior, I was set to buy the PC. I don't need a contractor grade tool. BUT, Milwaukee corporate has a deal where you can get a free battery (which I'll sell, because I don't need a 3rd battery) PC didn't reach the price point required for free shipping. With all of these perks, it was actually break-even or a bit cheaper for the Milwaukee!

The balance of the drill is great. This is due to the reversible battery. I thought this was a gimmick and thought it was stupid when I first saw it. However, after using the drill, it makes a noticeable difference to have the batter facing backwards. It acts as a counterbalance which has a great effect.

The power of this drill is great. Drives screws and drills holes in wood with no problem. Definitely notice no performance loss from my Craftsman corded drill. In fact, I think there's more power.

I look forward to many years of happy use with this drill. I love it. The PC was great too and probably represents a better value for people like me.