Modern Single Handle Waterfall Bathroom Vanity Vessel Sink LED Faucet, Chrome

by LITB

Product Description

The amazing aspect of the LED faucet is temperature sensor and three groups of small LED lights around the spout. When the water flows through the glass tray, the temperature sensor could detect the water temperature and reflect the result to the circuit, thus the lights which could illustrate the different temperature range could be controlled easily. Therefore, you could only "see" the water temperature without feeling it; this design protects your family not to be scald accidently, especially for the kids and senior citizens.

Please kindly take notes that the LED light only works while faucet is open,and could only afford 2kg of water pressure.

Features
- Solid brass construction and bright glass tray
- Chrome finish to add a luxurious feel of your bathroom
- Water flows off the glass tray like a waterfall
- Durable ceramic cartridge to avoid lead
- Hot & Cold water hoses included
- Single lever handle, single hole mount
- Easy to install
- Temperature sensitive :
-- 0-30C/0-86F = Blue LED;
-- 30-40C/87-104F = Green LED;
-- 41-50C/105-122F = Red LED;
-- 50-100C/123-212F = flashing Red LED

Specification
- Finsih: Chrome
- Material: Solid Brass
- Design: Waterfall
-Faucet Total Height : 6"
- Spout Height: 2.4"
- Spout Length : 5.4"
- Spout Width : 4.3"
- Handle: Single Lever Handle
- Mount: Single Hole Mount
- Faucet Hole Required: Standard US 1/2" Diameter
- Drain: Pop Up Drain (not included)

Package Including
- Waterfall Bathroom Vanity Vessel Sink LED Faucet
- Hot & Cold Water Hoses
- Installation Instruction

Product Details

• Item Weight: 4 pounds
• Shipping Weight: 4 pounds (View shipping rates and policies)
• ASIN: B004I1BS62
• Average Customer Review: 3.6 out of 5 stars  See all reviews (25 customer reviews)
• Amazon Best Sellers Rank: #2,972 in Home Improvement (See Top 100 in Home Improvement)
  • #5 in Home Improvement > Kitchen & Bath Fixtures > Bathroom Fixtures > Bathroom Sink Faucets

Customer Reviews

Most Helpful Customer Reviews

60 of 64 people found the following review helpful:

5.0 out of 5 stars Fantastic Products and looks very cool!, April 8, 2011

By 

zhuo yang (Irving, Texas USA) - See all my reviews

This review is from: Modern Single Handle Waterfall Bathroom Vanity Vessel Sink LED Faucet, Chrome

Length:: 0:39 Mins

The quality of this product is second to none. All parts are made of high grade material.

The installation is simple, I simply followed the provided instruction. The water line provided is much better than what I replaced. You will not regret this purchase.

Note: if you have a 3 hole sink, you will need to get 2 sink hole covers Danco 80247 1-1/2-Inch Faucet Hole Cover, which are not provided in the box. Or get a covering plate. Also, you might need a newBathroom Faucet Vessel Vanity Sink Pop Up Drain Stopper With Overflow Brushed Nickel or you might be able to find a way to use the old one.

25 of 29 people found the following review helpful:

1.0 out of 5 stars Beautiful design but poor workmanship, September 10, 2011

By 

A. LANE (West Palm Beach, FL) - See all my reviews
(REAL NAME)   

Amazon Verified Purchase

This review is from: Modern Single Handle Waterfall Bathroom Vanity Vessel Sink LED Faucet, Chrome

I just received this faucet 2 days ago and had the opportunity to install it today. I bought this for the unique design and the novelty of it lighting up. I went to install this in our guest bathroom, and as I got deeper and deeper into the job I realized this fixture is not what its cracked up to be. First problem is that the hoses were way too short, so a trip to 4 hardware stores and a plumbing supply store tell me it was a proprietary hose to this manufacturer and this hose is not available. I now also realize that the 1/2 inch fitting on the hose will not fit my 3/8 comp. fitting on my water valve. I was forced at this point to purchase two other small hoses for the reach and 2 brass adapters to unite these hoses together.

I figured that even with the extra parts to buy I was still slightly ahead of the game financially on this project. I then proceeded to thread the hoses that came with the faucet on to the base of it and went ahead with my installation. When I tested the faucet with the adapters and extra hoses I installed, I noticed a major leak and it was not from the union of the hoses, it was coming from the base of the faucet. I removed the faucet and noticed that the O rings on these hoses was pinched and bulged out of the hole they were supposed to be in. I pulled the hoses off and tried to figure this problem out, I tried several more times to install them with the same problem. This is when I noticed the difference between American machining of parts and Chinese machining of parts, one of the holes was threaded slightly off center, and this was the problem.

I then proceeded to try without the O rings and using teflon tape, no results. After hours of fooling with this poorly crafted piece of junk, I tried something that the manufacturer did not, the hoses had one end in a metric size, while the other was standard or American thread size, I went to my toolbox and found some old A/C O rings that I had when I had worked on import cars years ago. I found 2 metric O rings that were just a hair smaller than the ones on the hose originally, I replaced them, used teflon tape, and even with a crooked cut thread I was able to stop the leaking on this faucet.

It seems to me that the people shipping these out to the US are installing standard O rings on metric fittings. I also replaced the drain with a popup type and that went a little smoother. In the end this faucet took way longer and more money to install, than if I had bought a US version of this not to mention the almost five hours spent on it.

My suggestion, if you are willing to deal with some agravation and have patience, then the end result is worth it. Also I noticed that when you shut the valve off the LED's stay lit until the water drains from the glass housing, this can take a few hours. The fix for that is after you use the faucet, if the LED's stay lit rub your finger back and forth across the water outlet area and it will drain enough water to shut the LED's off.

November 2011 - To update this review, after an ill fated attempt of the manufacturer trying to satisfy me by sending the updated hoses and fittings, just a few months later the LED's quit working. I replaced the batteries and checked all connections, but in the end my original assumption that this was a cheap piece of junk was right. The light effect was the whole reason I went through the torture of installing this and now that is gone. Save yourself the grief, buy the one with no LED's, at least the only disappointment you might have is when this piece of garbage rust's and then leaks which I expect to happen soon.

10 of 11 people found the following review helpful:

3.0 out of 5 stars One serious flaw, otherwise great., July 14, 2011

By 

Howard Rothstein (Chicago, IL USA) - See all my reviews
(REAL NAME)   

Amazon Verified Purchase

This review is from: Modern Single Handle Waterfall Bathroom Vanity Vessel Sink LED Faucet, Chrome

Other people have spoken of the pluses of this faucet so I'll just cut to chase with the flaw. The piece of glass that the water flows out of wasn't designed to drain properly; water surface tension keeps in water in the chamber. Since the LED light is triggered by the presence of water, it's constantly on.

Yes, you can run your finger along the bottom edge to break the surface tension but you really shouldn't to and guests can't be expected to do so.

If you can live with that issue, it's a lot of "gee whiz" for the money.