|Item Weight||2.7 pounds|
|Product Dimensions||59 x 8.7 x 1.8 inches|
|Item model number||CSR2155OWB|
|Color||Old World Bronze|
|Item Package Quantity||1|
|Warranty Description||Limited lifetime warranty|
Other Sellers on Amazon
+ $10.00 shipping
+ $9.99 shipping
Moen CSR2155OWB Inspirations Curved Shower Rod, Old World Bronze
|Price:||$51.53 & FREE Shipping. Details|
|You Save:||$6.52 (11%)|
- Enter your model number above to make sure this fits.
- Old world bronze finish creates a gently distressed golden look with rich light and dark accents
- Fits standard 72-inch by 72-inch shower curtains
- Mounting posts feature multiple holes that allow for a secure installation
- 3-inch round flange covers conceal holes from previous shower rods
- Quickly and easily add 6-inch - 7-inch of elbow room to the shower without having to remodel
Frequently Bought Together
Customers Who Bought This Item Also Bought
Compare to Similar Items
This item: Moen CSR2155OWB Inspirations Curved Shower Rod, Old World Bronze
|Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping|
|Color||Old World Bronze||Heritage Bronze||Old World Bronze||Old World Bronze|
|Length||0 inches||46 inches||0 inches||59 inches|
|Item Package Weight||2.7 pounds||3.55 pounds||2.3 pounds||2.1 pounds|
Please help us improve this feature. Tell us what you think of this feature.
Quickly and easily add 6 to 7 feet of elbow room to the shower without having to remodel with this curved shower rod in old world bronze from Moen's CSI Inspirations collection. Featuring a strong stainless steel construction with a 1-inch rod diameter, this package includes decorative covers that provide a stylish complement while also helping to conceal the mounting hardware.
Note that this shower rod was designed for installation between wall dimensions that are 59 to 60 inches apart. If the measurement of the walls is less than 59 inches, it is necessary to cut the bar. It fits standard 72 x 72-inch shower curtains.
This shower rod is backed by a limited lifetime warranty against finish defects to the original consumer purchaser. If this product fails due to materials or workmanship at any time during the life of the product, Creative Specialties International, a division of Moen Incorporated, will replace it free of charge, postage paid.
What's in the Box
Curved shower rod; drywall anchors; decorative covers; installation instructions
Add up to 7 extra feet to your shower.
Available in a number of finishes.
Top Customer Reviews
The installation maye take you a while if you have a stoned shower wall. I had travertine, and the installation took me about an hour. Drilling the 6 holes on the two walls (3 holes each) took the most time. You would need to get a 3/16" masonary drill, anchor, stainless screw.
Advice: before you drill on the wall, put a masking tape on the wall. Otherwise the drill bit will slide on the wall. Use 3/16" drill bit and size #10 anchor. The anchor needs to be exact size #10, too small will not grab, too large will not stay. Use stainless screws otherwise they will rust over time.
Moen does a nice job to help make installation as easy as possible. The instructions contain a mounting template for each end of the shower rod. If the wall has studs, on the template they show you where to drive your wood screws. If you're mounting to drywall with no stud underneath, they show you where to drill the hole for the wall anchors. They provide six wall anchors (three per side), but, strangely, they don't provide the wood screws. This confused me, but it wasn't a show stopper. Just be aware that, if you will be installing this into studs, you'll have to supply your own screws.
Installation was fairly simple and is best done by two people--one to do the drilling/screwing and the other to hold the rod. The rod swings widely on its plastic mounts, so you can separate both ends and piece them together, if you decide to separate them and mount one side first, then the other. This allows for an easier install rather than someone holding the entire rod while the first side is being mounted. When mounting is complete, the end caps snap over the mounting plate to provide a clean and very professional finish.
Overall we're very pleased with this product. Moen has a reputation for making quality products and this shower rod is no exception. Our bathroom remodel found us selecting Moen products for the shower, sink, and shower rod, and we couldn't be happier with how this rod perfectly matches up with all the other Moen fixtures in our bathroom.
Most Recent Customer Reviews
worked great. seems strong. would buy again. nice style and quality. love not having the break in the post.Published 19 days ago by John Barbuto
Absolute garbage. Completely covered in rust after one year. What is the point using materials that rust for something that goes in the bathroom? Read morePublished 3 months ago by WilliamsFamily
Seems solid and nicely made.
Unfortunately it would not work for our application. Because the rail overhangs the area outside the tub, when the shower curtain is closed... Read more
The best shower rod I ever owned, smooth travel, no joints to snag hooks. Just happened to fit our new bathroom and no alterations needed.Published 5 months ago by Zeke
The pin holding one side of the rod in place wasn't all the way through to the other side and had to be hammered into place and the end caps don't snap securely over the plastic... Read morePublished 6 months ago by M. Royce
As advertised- I don't know why anyone would put up with a straight rod.Published 7 months ago by Don B