- Bearing Plate
- Upper Spring Isolator
- Upper Spring Seat
- Coil Spring
- Boot Kit
See all vehicles this product fits.
Product Features |
Frequently Bought Together
Related Items
- Most Popular
- Steering & Suspension Tools
- Books
Product Details
Would you like to give feedback on images?
|
Product Specifications
| Product Information | |
| Brand: | Monroe |
| Manufacturer Part Number: | 171958 |
| Sizing and Specifications | |
| Item Weight: | 8 Pounds |
| Height: | 10.20 inches |
| Length: | 27.20 inches |
| Width: | 10.70 inches |
Product Description
The revolutionary Monroe Quick-Strut unit is the first complete, ready-to-install replacement strut assembly available! Monroe Quick-Strut units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics
Tags Customers Associate with This Product(What's this?)Click on a tag to find related items, discussions, and people.
|
Customer Reviews
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
6 of 6 people found the following review helpful:
5.0 out of 5 stars
Camry Monroe Quick-Strut Assemblies and Sway Bar Bushing and Bushing Replacement,
Amazon Verified Purchase(What's this?)
This review is from: Monroe 171958 Quick-Strut Complete Strut Assembly (Automotive)
This product review refers to the following suspension products as installed on a 1996 Camry LE 4 cyl.
Monroe 171958 Quick-Strut Complete Strut AssemblyMonroe 171957 Quick-Strut Complete Strut AssemblyMonroe 171979 Quick-Strut Complete Strut AssemblyMonroe 171980 Quick-Strut Complete Strut Assembly Moog K90313 Rear Sway Bar End Link Kit Moog K90253 15 mm Rear Sway Bar Frame Bushing In another century and another life I was a professional mechanic, but with the last two decades' more complex automobiles, I keep it simple. The Monroe Quick-Strut assemblies are simple to install and come with adequate install directions, although for my own comfort, I bought a used Haynes repair manual. Unless you are willing to pay a lot more for something exotic, buy the individual parts to make-up an assembly and do a lot more work requiring more specialized tools, Monroe, an old and respected aftermarket auto parts supplier, gives you all the pieces properly assembled at a "bundled price" you can't beat. For an older high mileage cars like mine, springs, seats, bumpers, and strut bearings are worn and fatigued (especially springs) and need replacement. Replacing all four struts, the sway-bar bushing and links has restored my old Camry to its new-car ride. You will need an assistant to help you lift the 25-pound assemblies into the fender wells and attach the top three nuts on the struts. Before installation, checking the top strut compression nut for proper torque is a good idea as suggested by another reviewer. Mine were fine out of the box. I used the old nuts, but think the new nuts supplied are probably ok. Torquing to specifications is mandatory and if done properly, locktite should not be necessary. I highly recommend the use of a click-type torque wrench over a beam variety and you will need one that torques above 200 ft lbs. My local O'Reilly Auto Parts loaned me this tool on my credit card and you may be able to find a parts store in your area that will do the same. Penetrating oil on the nuts and bolts, especially on the underside a day or so before you go to work is an excellent tip from another reviewer, particularly in climates where salt is used on the roads. After installation you will need a four-wheel alignment. Today this is a completely computerized laser-beam operation, so with the Camry's simple adjustment set-up I took the low bid (about $72). Check for discount coupons. If your car has been in an accident, you may need someone (a real mechanic) who knows how to deal with an "out of specifications" situation. Finally, if after all is said and done, you have a knocking sound from the back when you go over bumps, it's most likely the rear sway bar bushings and/or the sway-bar links. Disconnecting the sway-bar links and wire or tape them to the sway bar and drive the car. If the knocking sound is gone, then this is your problem. Replacement of bushing and links is four bolts, four nuts, and a small amount of vegetable oil (not petroleum grease) to lubricate the bushings. Tools: 12 mm, 14 mm. 19 mm. 22 mm sockets, ratchet, ½ inch breaker bar, extensions, hammer, punch, 200 ft lb ½ inch drive click-type torque wrench.
5 of 5 people found the following review helpful:
2.0 out of 5 stars
Good Product, Poor Assembly,
By
This review is from: Monroe 171958 Quick-Strut Complete Strut Assembly (Automotive)
I installed two new quick struts in the rear of my camry, willing to pay the premium for the ease of instillation for having the entire strut preasembled for me. They went in fine, but when I took the car out for a test drive there was a terrible knocking from both sides. Not thinking for a second that it would be a problem with the struts, I removed the wheels again and checked to see if anything was tight.
After a lot of wasted time I finally found a couple posts for other cars that had similar problems that came from Monroe not properly tightening the top strut nut to anywhere close to 60ft/lbs. After fighting my way to gain acess to the top nut I found that it must have just been put on finger tight. I would have given this product 4-5 stars if they had put it together right and not made a 1hour job take 5 hours. You pay essentially an extra $25-50 for them to compress the spring and tighten one bolt, which is apparently beyond them. Monroe should be embaressed with the quality of there assembly.
5.0 out of 5 stars
Quick and Easy,
By
Amazon Verified Purchase(What's this?)
This review is from: Monroe 171958 Quick-Strut Complete Strut Assembly (Automotive)
Bought these for a 95 Toyota Avalon and couldn't be happier with how simple the installation is. It is literally an 30 minute job needing the following tools:
21mm socket 19mm socket 14mm socket 12mm socket 10mm socket Jack Stand Jack If you can do a simple brake job, you can install these struts too. ps. you might want to change your brake pads while doing this job you will already have them out.
Share your thoughts with other customers: Create your own review
|
|
Customer Discussions
|
This product's forum
Active discussions in related forums
Search Customer Discussions
|
Related forums
|
