New motor, significantly reduces the operating noise, the volume level (70dB or less) is achieved.
High sensitivity wireless sensors
The high performance wireless sensor covers a distance of 25 meters (Direct line of site). Using these high performance sensors, multi-flash lighting is simple and effective.
Durable hot-shoe mounting
The metal hot shoe mount is easy to install and will not wear down over time.
Color and Auto Rotate Display, gives users simple and user friendly menu interface
The Color Display will automatically rotate the six color icons to always be vertical no matter what position the camera is in. These menus give user friendly operation and access to all of the different menus – Auto, TTL, Manual/Av, Multi, Wireless TTL (Master/Remote) and Customer Setting.
Various Functions – TTL, Manual/Av, Multi Flash
TTL: The Di866 Mark II Supports, Canon E-TTL/E-TTL II , Nikon i-TTL/i-TTL-BL and Sony ADI/P-TTL. Flash output is automatically controlled by the camera but the flash exposure value can be compensated.
Manual: Flash power can be adjusted manually at 22 levels, from full power to 1/128 power using 1/3 stops. The appropriate distance to the subject is shown in the display in accordance with the aperture value set on the camera.
Av priority: The flash output can be automatically controlled by the photo sensor built-in the flash unit instead of TTL metering. The F. Stop can be set from F1.4~F16. The distance at the F-stop set on the flash is shown in the display.
Multi Flash: The power ratio can be set from 1/8 to 1/128.
The best solution for off camera flash technique
The Di866 Mark II Wireless TTL system supports Canon/Nikon/Sony wireless TTL systems. The Di866 Mark II can be used jointly with Canon, Nikon and Sony original flash as either Master or Remote (Slave).
The Di866 Mark II also supports digital (pre-flash system) and analog (film type camera’s flash and/or studio flash) under both the Manual and Av. priority mode.
Multi-Flash: Repeating flash for multi-exposure image in one frame.
The power ratio can be set from 1/8 to 1/128.
The Di866 Mark II provides an extra small flash (GN12) below the main flash. This small flash gives a fill-in light while bouncing the main flash. Bouncing the light may shadow the underside of face, and this fill-in flash brightens up that shadow. The power ratio of Sub-Flash can be set from 1/1 to 1/128
Auto Zoom covers 24~105mm focal range. Light diffusing panel covers wide 18mm (35mm format)
The TTL exposure level has been pre calibrated for standard balance in accordance with Nissin’s standards. However if any adjustment is required, or if you like to set your own preferred level, it can be adjust +3Ev. ~-3Ev. by every 1/3 step.
Quick Loading Battery Magazine
The Di866 Mark II has a quick change battery magazine system, (same as the Di866 professional and Di466). The convenient battery magazine provides all four AA-size batteries slot in the same direction, so that the batteries can be correctly inserted without fail even in the poor light condition. Extra magazines can be purchased to have extra power available at your fingertips in stressful shooting situations.
External Service Box
External Power Pack Socket – Di866 Mark II supports Nissin Power Pack PS 300.
X terminal – Di866 Mark II has X-terminal socket for flash synchronization.
USB Service Port – Di866 Mark II provides a USB port to update the latest firmware.
Rear curtain sync and High speed shutter
In Rear curtain sync., the flash fires just before the rear curtain closes. By using this function at slow shutter speeds, a moving subject will appear with such moving marks behind.
High speed sync. is recommended for daylight flash photography.
Flash head tilts up to 90°and rotates horizontally 90° to the right and 180°to the left.
Built in Bounce card reflector and Light diffusing panel