Indications1st time using: For Lithium battery powered scale, please pull the insulation tape out for the first time activation. (Note: after pulling out the tape, make sure the batteries are still in good position & well contact.) Loose batteries will cause the scale inaccurate and hard to be activated.
Put the scale on a hard & flat surface. Switch on the scale by foot tap or toe till the front middle platform. Normally, it takes around 2 seconds to activate, you need to wait for the blinking 0.00 to stop before stepping on it. Carpeted or uneven surfaces will distort the accuracy of the scale
DirectionsThe best way to activate this scale is to lift or tilt the scale with your big toe or toes about ½ inch and then drop it slightly. It turns on automatically almost 100% of the time. No need to bend over to search for on/off button. You can also tap it with your foot to activate the scale, but the tapping has to create enough vibration for the scale to respond. We do not recommend standing with one foot & tapping the scale with another. Such tapping may be hard for seniors or people with difficulties of standing with one foot. Therefore, the best way is to stand firmly on the floor, toe lift and drop the scale slightly to turn it on.
Legal DisclaimerActual product packaging and materials may contain more and different information than what is shown on our website. We recommend that you do not rely solely on the information presented and that you always read labels, warnings, and directions before using or consuming a product. Please
see our full disclaimer below.