0 items added

To add items, choose from the table below

Image Unavailable

Image not available for
Color:
  • Niagara Cutter C230 Carbide Square Nose End Mills, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, For Use With All Materials
  • Sorry, this item is not available in
  • Image not available
  • To view this video download Flash Player
      
Image is representative of the product family. Select individual products in the table below for more specific images and product specifications

Niagara Cutter C230 Carbide Square Nose End Mills, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, For Use With All Materials

Available in multiple versions

3 customer reviews

Price: $8.15 - $390.32
Product Specifications
Brand Name Niagara Cutter
Material Type Carbide
Finish Types TiAlN
Compatible Material All Materials
Cut Type Roughing and Finishing
Cutting Angle 30  Degrees
Cutting Direction Right Hand
End Cut Type Center Cutting
Manufacturer Series Number C230
Number of Flutes 2
Shank Type Round
System of Measurement Inch
UNSPSC Code 27112803

The Niagara Cutter C230 TiAlN-coated carbide square nose end mill has two flutes and a 30-degr... Read full product description



Sandvik Coromant Cutting Tools

sandvik coromant cutting tools
Shop a wide selection of Indexable Cutting Tools from Sandvik Coromant. Learn more
Currently showing 1-20 of 97 Next »
Size Part Number Price Quantity
   
1 in B003BIETKA
In Stock (2)
$27.23
Prime Eligible
1 in B003BIETKK
In Stock (1)
$219.30
Prime Eligible
1 in B003BIETKU
In Stock (1)
$379.13
Prime Eligible
1 in B003BIETL4
Usually ships in 1 to 2 months
$390.32
Prime Eligible
1 in B003BIETLE
Usually ships in 1 to 2 months
$273.79
Prime Eligible
1/16" B003BIESK6
In Stock (2)
$10.90
Prime Eligible
1/16" B003BIESKG
In Stock (1)
$12.69
Prime Eligible
1/16" B003BIESKQ
In Stock (7)
$15.42
Prime Eligible
1/2 in B003BIETDW
In Stock (1)
$36.36
Prime Eligible
1/2 in B003BIETE6
In Stock (3)
$38.31
Prime Eligible
1/2 in B003BIETEG
In Stock (2)
$72.10
Prime Eligible
1/2 in B003BIETEQ
In Stock (1)
$68.98
Prime Eligible
1/2 in B003BIETF0
Usually ships in 1 to 2 months
$72.10
Prime Eligible
1/2 in B003BIETFA
In Stock (1)
$51.60
Prime Eligible
1/2 in B003BIETFK
In Stock (1)
$72.13
Prime Eligible
1/32" B003BIESJ2
In Stock (5)
$13.73
Prime Eligible
1/32" B003BIESJC
In Stock (4)
$13.73
Prime Eligible
1/4 in B003BIESRY
In Stock (3)
$17.16
Prime Eligible
1/4 in B003BIESS8
In Stock (3)
$19.21
Prime Eligible
1/4 in B003BIESSI
In Stock (1)
$32.24
Prime Eligible
Currently showing 1-20 of 97 Next »
Could not load your selection

We're sorry. An error occured when we tried to load your product family table. Rest assured, we're working to resolve the problem as soon as possible. Please refresh the page.


Product Features

  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cuttings speeds, offering better heat resistance than TiN and TiCN coatings
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
  • Square nose end mills (also called square end) create sharp, unrounded cuts
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

Product Details

  • Shipping Information: View shipping rates and policies
  • Domestic Shipping: Item can be shipped within U.S.
  • International Shipping: This item is not eligible for international shipping. Learn More
  • ASIN: B00A0P94H0
  • Average Customer Review: 5.0 out of 5 stars  See all reviews (3 customer reviews)
  • Manufacturer’s warranty can be requested from customer service. Click here to make a request to customer service.

     Would you like to give feedback on images?


Product Description

The Niagara Cutter C230 TiAlN-coated carbide square nose end mill has two flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s square end has straight cutting edges that create sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. It also offers increased hardness for abrasion resistance and may reduce the need for lubricants based on the application. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is +0.000” to -0.002”. The round shank accommodates a variety of holders.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.p>

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.


Customer Questions & Answers

Customer Reviews

5 star
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
See all 3 customer reviews
Share your thoughts with other customers

Most Helpful Customer Reviews

1 of 1 people found the following review helpful By Brett on December 21, 2012
Size: 1/8 in Verified Purchase
Niagara makes great quality end mills. They are now my go-to supplier for tooling. I just wish they offered tapered engraving tools.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
By Earl on November 29, 2014
Size: 1/8 in Verified Purchase
Great Bit, Works great!
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
By James Wegener on June 2, 2015
Size: 3/32" Verified Purchase
Great
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again