0 items added

To add items, choose from the table below

Image Unavailable

Image not available for
Color:
  • Niagara Cutter C430 Carbide Square Nose End Mills, Inch, TiN Finish, Roughing and Finishing Cut, 30 Degree Helix, For Use With All Materials
  • Sorry, this item is not available in
  • Image not available
  • To view this video download Flash Player
      
Image is representative of the product family. Select individual products in the table below for more specific images and product specifications

Niagara Cutter C430 Carbide Square Nose End Mills, Inch, TiN Finish, Roughing and Finishing Cut, 30 Degree Helix, For Use With All Materials

Available in multiple versions


Price: $13.14 - $60.82
Product Specifications
Brand Name Niagara Cutter
Material Type Carbide
Finish Types TiN
Compatible Material All Materials
Cut Type Roughing and Finishing
Cutting Angle 30  Degrees
Cutting Direction Right Hand
End Cut Type Center Cutting
Manufacturer Series Number C430
Number of Flutes 4
Shank Type Round
System of Measurement Inch
UNSPSC Code 27112803

The Niagara Cutter C430 TiN-coated carbide square nose end mill has four flutes and a 30-degre... Read full product description



Sandvik Coromant Cutting Tools

sandvik coromant cutting tools
Shop a wide selection of Indexable Cutting Tools from Sandvik Coromant. Learn more
Currently showing 1-7 of 7
Size Part Number Price Quantity
   
1/2 in B003CP0Y9W
In Stock (1)
$60.82
Prime Eligible
23/64" B003CP0Y2O
In Stock (1)
$23.46
Prime Eligible
3/16 in B003CP0XVG
In Stock (1)
$22.37
Prime Eligible
3/32" B003CP0XRA
In Stock (1)
$24.44
Prime Eligible
3/64" B003CP0XNY
In Stock (1)
$13.14
Prime Eligible
3/8 in B003CP0Y56
In Stock (1)
$48.22
Prime Eligible
7/16" B003CP0Y7E
In Stock (1)
$40.93
Prime Eligible
Currently showing 1-7 of 7
Could not load your selection

We're sorry. An error occured when we tried to load your product family table. Rest assured, we're working to resolve the problem as soon as possible. Please refresh the page.


Product Features

  • Four flutes produce a better finish than fewer flutes
  • Square nose end mills (also called square end) create sharp, unrounded cuts
  • Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

Product Details


Product Description

The Niagara Cutter C430 TiN-coated carbide square nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s square end creates sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The general-purpose TiN coating combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. (TiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is +0.000” to -0.002”. The round shank accommodates a variety of holders.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.


Customer Questions & Answers

Customer Reviews

There are no customer reviews yet.
5 star
4 star
3 star
2 star
1 star
Share your thoughts with other customers