- 2-stage pump allows the log splitter to achieve the same pressures as a single stage pump, while using less horsepower
- Auto-return wedge
- Patented log stripper clears log from retracting wedge
- Industrial-grade full beam construction
- Coupler for 2in. ball
Product Features |
Product Details
Would you like to update product info or give feedback on images?
|
Product Description
This NorthStar Horizontal/Vertical Log Splitter is powered by a quality Honda GC engine. The 4in. x 24in. cylinder splits logs up to 25in.L in either in a vertical or horizontal position. Features a 2-stage Barnes pump, which decreases cycle time by delivering high flow/low pressure when there is no resistance and low flow/high pressure when cutting through a log to reduce travel time and increase productivity. Uses a horizontal-shaft engine, engineered for a long life. Add the exclusive NorthStar 4-way wedge wings (Item# 1143, sold separately) to quarter logs in one split instead of three. Ram Force (Tons): 22, Operation: Horizontal / vertical, Max. Log Size L x W (in.): 25 x 16, Continuous Force (Tons): 18.8, Engine: Honda GC, HP: 5, Engine Displacement (cc): 160, Wedge: Cast steel, Cycle Time (sec.): 13, Automatic Cylinder Return: Yes, Cylinder: 4in. x 24in., Pump: Barnes 11 GPM, 2-stage, Max. PSI: 3,000, Oil Reservoir (gal.): 8, Log Cradle: Yes, Log Lift: No, Jack Stand: Yes, Ball Coupler (in.): 2, Tire Size: 4.80 x 8, Lights: No, Fenders: No, Pre-assembled: Assembly required, Dimensions L x W x H (in.): 89 x 43 x 41
Customer Reviews
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
18 of 25 people found the following review helpful:
1.0 out of 5 stars
worst on line purchase of my life,
By
This review is from: NorthStar Horizontal/Vertical Log Splitter - 22-Ton, 160cc
It's been 5 weeks since I recieved my splitter. Unfortunately the bags of hardware needed for assembly were missing from my shipment, causing a one week delay. Finally, after a multi-hour assembly, the Honda engine started perfectly, but the splitter would not move. After many hours on the phone with the manufacturer, I was told to tow the splitter to the nearest engine/tool shop 15 miles away. There it sits, 2 weeks and counting.Understandably, they work on their own stuff first. The is awful. My advice? Buy local.
7 of 42 people found the following review helpful:
1.0 out of 5 stars
I'll second that,
By D. Mikels "It's always Happy Hour here" (Skunk Holler) - See all my reviews
This review is from: NorthStar Horizontal/Vertical Log Splitter - 22-Ton, 160cc
Got tired of lookin' at all the telephone poles foulin' up my view of beloved Skunk Holler, so me and the relatives pooled our pennies and got this log splitter (NORTHSTAR HORIZONTAL/VERTICAL LOG SPLITTER - 22-TON, 5 HP). Heck, took some 12 hours to assemble, and even then, Cousin Buford had half a dozen bolts and seven washers left over (plus we had done used all of our electrician's tape).
Well, we fired up that Honda GC engine, and she came to life like a saber-toothed tiger. . .and lurched like one, too. The exclusive Northstar 4-way wedge sure made an interesting addition to Uncle Hiram's garage door, I'm tellin' ya. (What's left of it.) So we towed this puppy to the first telephone pole and launched that ram force of 22 tons. But wait. The log has to actually be lyin' on the ground? Well, forkle, that's no good. So we just got Cousin Luther's pole axe and had them unsightly poles down in no time; trouble is, now we can't call to return the log splitter (NORTHSTAR HORIZONTAL/VERTICAL LOG SPLITTER - 22-TON, 5 HP). Who knows? Maybe this splitter just don't like guys named D. --D. Mikels, Esp.
Share your thoughts with other customers: Create your own review
|
|
Look for Similar Items by Category
|
