Small: 9 x 3.75
Medium: 11.5 x 5
Large: 13.5 x 5.75
Note: White decals show up best on windows, especially tinted ones.
Not finding the size you need? Contact us, we may be able to create a custom size for you!
This Northern Pike Fishing Decal is cut from vinyl that is approximately 3 mil thick and has an estimated outdoor life of 5 years.
Decal Installation Instructions:
Clean the surface of the application area with alcohol. Do not allow the alcohol to evaporate on the surface.
Separate the transfer tape from backing - the decal is attached to the transfer tape (the top, see-through layer).
Center the decal over the desired location (truck window, etc.). Lightly position the decal on the surface, then use a squeegee or credit card to smooth it out, starting from the center and moving to the edges. Rubbing the decal with your fingers first will heat up the vinyl and aid in removing the decal from the transfer tape.
Peel the transfer tape off at an angle starting from one corner, and keep the transfer tape close to the application surface.
NOTE: Do not apply in direct sunlight especially if the surface is hot, as this will cause decal to prematurely stick. The ideal installation temperature is 55-95 degrees. Do not use water or other liquids when installing these decals. Liquid installation will shorten the life of the decal or cause areas underneath that do not adhere to the installation surface. Allow the decal to cure on the vehicle for two weeks before reapplying car wax or other protective vehicle or window coatings.