- P-graded ceramic aluminum oxide is a self-sharpening grit that is harder, tougher, and lasts longer than aluminum oxide
- Resin bonds have good heat and moisture resistance, and retain abrasive grains well
- Heavy cotton backing is stiffer, tougher, and thicker than a paper or film backing
- Versatile usage provides low cost operations
- Variety of sizes and grits available offer flexibility
0 items added
To add items, choose from the table below
Norton Metalite Plus R369 Abrasive Flap Wheel, 1" Arbor, Ceramic Aluminum Oxide
|Price:||$31.41 - $56.54|
|Brand Name||Norton Abrasives - St. Gobain|
|Grit Material Type||Ceramic Aluminum Oxide|
|Arbor Hole Diameter||1 inches|
|Fastening Type||Round Hole|
|Max Rotational Speed||6200 RPM|
|Outside Diameter||6 inches|
|Overall Width||1 inches|
|Shank Width||[ N/A ] inches|
|System of Measurement||English|
Norton Metalite Plus R369 abrasive flap wheels with a one-inch arbor are suitable for aggressi... See more product details
Norton Metalite Plus R369 abrasive flap wheels with a one-inch arbor are suitable for aggressively grinding or deburring metals, rubber, plastics, and hard woods. Used on stationary or portable sanders, the flap wheel design offers a controlled removal of material, with minimal disruption of surface features.
Coated abrasives have individual abrasive grains spaced at a predetermined distance from one another. This is a closed-coat wheel. A closed coat covers 100 percent of the surface with abrasive grains, for more stiffness and better surface finish than an equivalent open coat, where abrasive grit covers 50 to 70 percent of the surface. This wheel features a resin bond. Resin bonds have good moisture resistance, are harder and less flexible than glue bonds, and have good heat resistance and grain retention. Resin bonds are useful for abrasive operations with high operating speeds, impact, and sudden loading, as the resin bond is strong and can withstand rough treatment. Use with molded rubber back-up pads, using a hard pad for aggressive cutting, a medium pad for general purpose applications, or a soft pad for contours and fine finishing work.
Ceramic aluminum, sometimes called ceramic alumina oxide, is tougher than aluminum oxide, and is self-sharpening. It is formed in a process where alumina gel is dried and then crushed. These engineered crystals fracture and refracture at fine levels, to form a smooth, self-sharpening abrasive material. Ceramic aluminum oxide is most commonly used for medium-to-high material removal on metals.
Abrasives are used for a variety of applications from shaping a part to fine finishing, depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish.
Norton Abrasives manufactures a wide variety of sanding, sanding, and polishing abrasives, and has been located in the United States since 1885. In 1990, Saint-Gobain purchased Norton, keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company, as well as earning ISO 9000 and 14001 certification for quality and environmental management standards.