- Aluminum oxide is durable and the most common abrasive grain
- Flexible cotton backing, provides a soft action with flexibility for a finer finish
- Resin bonds have good heat and moisture resistance, and retain abrasive grains well
- Versatile usage provides low cost operations
- Variety of sizes and grits available offer flexibility
0 items added
To add items, choose from the table below
Norton Metalite R265 Abrasive Flap Wheel, 5/8" Arbor, Aluminum Oxide
|Price:||$12.49 - $158.57|
|Brand Name||Norton Abrasives - St. Gobain|
|Grit Material Type||Aluminum Oxide|
|Arbor Hole Diameter||5/8 inches|
|Fastening Type||Round Hole|
|Shank Width||[ N/A ] inches|
|System of Measurement||English|
Norton Metalite Plus R265 abrasive flap wheels with a five-eighths-inch arbor are suitable for... See more product details
Norton Metalite Plus R265 abrasive flap wheels with a five-eighths-inch arbor are suitable for a smooth, consistent, chatter-free, low-pressure finish with a uniform rate of cut. Used on stationary or portable sanders, the flap wheel design offers a controlled removal of material, with minimal disruption of surface features. As the flap wheels wear away, they continuously expose fresh abrasive.
Coated abrasives have individual abrasive grains spaced at a predetermined distance from one another. This disc is closed-coat. An open coat covers about 50 to 70 percent of the coated surface with abrasive, for greater flexibility and resistance to clogging than a closed coat, which has 100 percent grain coverage. An open coat allows for longer usage time by clogging less, while a closed coat offers a finer surface finish than an equivalent open-coat abrasive. This disc features a resin bond. Resin bonds have good moisture resistance, are harder and less flexible than glue bonds, and have good heat resistance and grain retention. Resin bonds are useful for abrasive operations with high operating speeds, impact, and sudden loading, as the resin bond is strong and can withstand rough treatment. Use with molded rubber back-up pads, using a hard pad for aggressive cutting, a medium pad for general purpose applications, or a soft pad for contours and fine finishing work.
Aluminum oxide is a widely used abrasive material. It is a durable, wear-resistant grit that works well with soft metals such as brass, as well as ferrous (iron-containing) metals such as stainless steels. Aluminum oxide abrasive grain is chosen for its versatility and can be used on many metals.
Abrasives are used for a variety of applications from shaping a part to fine finishing, depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish.
Norton Abrasives manufactures a wide variety of sanding, sanding, and polishing abrasives, and has been located in the United States since 1885. In 1990, Saint-Gobain purchased Norton, keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company, as well as earning ISO 9000 and 14001 certification for quality and environmental management standards.