OMNIMOUNT Television Top Shelf CCH1P

Other products by OmniMount

Product Details

• Product Dimensions: 1 x 19.2 x 15.5 inches ; 5.6 pounds
• Shipping Weight: 6 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• ASIN: B0007QVXLC
• Item model number: CCH1P
• Average Customer Review: 4.3 out of 5 stars See all reviews (20 customer reviews)
• Amazon.com Sales Rank: #4,372 in Electronics (See Bestsellers in Electronics)

  Popular in this category: (What's this?)

  #8 in

  Home & Garden > Furniture & Décor > Furniture > Home Entertainment Furniture > Audio-Video Shelving

• Date first available at Amazon.com: September 8, 2008

Product Description

Product Description
OmniMount Component Shelf is a modular addition to the Video Basics TV System for mounting/display of audio/video components, consistent with overall appearance and integration of Cable-Less technology. It can be used as a solo shelf system, or with an existing TVS/TVD mount. The Component Shelf is designed to work with the TVD Series and TVS Series.

Customer Reviews

Most Helpful Customer Reviews

12 of 12 people found the following review helpful:

5.0 out of 5 stars Works well for holding my heavy center channel, June 19, 2006

By	Ryan Fosnaugh (Tampa, FL) - See all my reviews (REAL NAME)

I recently purchased this product and have found it to be the perfect solution for putting a center channel on top of a LCD TV set. I was worried that the back of the tv set would be too steep, however the adjustable legs made it possible to fit it properly. For those who may be worried the same, you can measured from the front of the TV back by 12 inches, and down by just over 11 inches. If this will reach the back of your tv, then it will likely work no problem. There are two slots closer to the front to put the legs closer than 12 inches from the fron of the tv, however, I don't know that I would trust supporting the weight like this. The manual says that it will hold up to 30 lbs, and my center which is a healthy 27 lbs, held with no problem whatsoever.

10 of 10 people found the following review helpful:

5.0 out of 5 stars Top Choice TV Top Shelf Mount, January 11, 2007

By	John B. Pedretti (California) - See all my reviews (REAL NAME)

I did my homework before making a purchase and read every opinion I could on these tv top mount shelves. I found the thicker black plastic ones to be very unattractive and cheesy for my new 60" TV. However, when came upon the Omnimount and its very thin, about 1/16" sleak design I knew this is what I wanted. So again I went out and read other reviews on this product. This was very helpful as I found that many people were "dis-satisfied" because they thought parts were missing on shipment which was not true! I found that the factory assembles all of the small loose pieces together in the box. When you open the box you "must" note that their assembly configuration was for shipping and you are not looking at a complete product ready to use. You must first "read" and "LOOK" at the instructions pictures and then you will see how to take apart a few small pieces and reassemble as needed for your paticular TV. Many people thought the front pins that hold the TV shelf to the front top of the TV were missing. You will have some pieces left over so don't panic! Also, this stand will hold the weight as they tout, its bullit proof, worth the money and a great buy!

8 of 8 people found the following review helpful:

5.0 out of 5 stars Really Nice, Sturdy, Television Top Shelf, August 27, 2006

By	David A. Lessnau (Niceville, FL USA) - See all my reviews (TOP 1000 REVIEWER)    (REAL NAME)

I'm really impressed with this OmniMount CCH1P Center Channel (or Television Top) Shelf. I've got it on top of my old 27" Sony KV27S25 television with both my TiVo and cable box sitting on it. It's very steady and looks nice as well. As I write this review, there's not much detail on this Amazon site. So, I'll add some:

- This is essentially a large perforated steel trapezoidal plate. At its front, it's about 19" wide. This width tapers smoothly down to about 15" at the rear. From front to back, it's about 15.5" deep.
- There are two sets of leg mounts: one set is about 11" back from the front and the other is about 8" back.
- According to the documentation, it's got a maximum capacity of 30 lbs.
- Depending on the steepness and depth of the back of your television set, you can use one of three sets of mounting legs. It comes with the feet screwed onto the shortest legs (about 3/4" long plus the length of the foot mounting rods). I'm using the middle-sized legs which are about 3" long with another couple of inches in adjustable rods. There are also some 7.5" long extensions that you can add on. So, it looks like you can use this on a television with a 10" or 11" drop over an 8" or 11" depth.
- There are also a couple of 1" rods that can be screwed into the front of the plate to allow you to work over a ridge on the front of your television. This works well on my set: those rods are sitting in a sort-of groove on the front of my set and the back legs are the only other part touching. This allows for more flexibility in leveling the thing.
- There are also four adhesive pads for the feet to make sure the whole thing doesn't slide off the set.

Overall, I'm very impressed with it an give it an Excellent 5 out of 5 star rating. Highly recommended.