|
||||||||||||||||||||||||||||||||||||||
|
6 Reviews
|
Average Customer Review
Share your thoughts with other customers
Create your own review
|
|
2 of 2 people found the following review helpful:
5.0 out of 5 stars
Bearing splitter
High quality made in USA item. My husband removed a hard to remove hub from a motor shaft and bearing. You need the companion puller OTC 7373 or equivalent that attaches to the splitter. He found that an air impact wrench worked much better than using a wrench on the puller bolt. You can buy cheap made in China copies but they probably aren't made nearly as well to stand...
Published on October 3, 2008 by C. A. Bejtlich
|
 |
3.0 out of 5 stars
Works OK
I needed this for 1 rear wheel bearing job on a 4Runner to try and reuse the ABS ring. I got it off without cutting it but it got bent in the process so I wound up replacing it anyhow. But I have used it to pull a few pinion bearings and it worked better for that. It works OK for the price but if I were a pro I wouldn't bother with this one.
Published 3 months ago by FJ40 guy
|
|
Most Helpful First | Newest First
|
|
2 of 2 people found the following review helpful:
5.0 out of 5 stars
Bearing splitter,
By
This review is from: OTC 1122 1/8" to 2" Bearing Splitter (Misc.)
High quality made in USA item. My husband removed a hard to remove hub from a motor shaft and bearing. You need the companion puller OTC 7373 or equivalent that attaches to the splitter. He found that an air impact wrench worked much better than using a wrench on the puller bolt. You can buy cheap made in China copies but they probably aren't made nearly as well to stand up to normal use.
2 of 2 people found the following review helpful:
5.0 out of 5 stars
Bearing Splitter,
This review is from: OTC 1122 1/8" to 2" Bearing Splitter (Misc.)
Works perfectly. I'm surprised at the uses I've found for it. Make your self a 1/2" metal disk to bolt to the two holes and you can use a puller tool with it to pull otherwise inaccessible items off.
I've used an abused this tool and it's standing up very well.
1 of 1 people found the following review helpful:
5.0 out of 5 stars
gets it done,
By
Amazon Verified Purchase(What's this?)
This review is from: OTC 1122 1/8" to 2" Bearing Splitter (Misc.)
i used this for pulling small (35mm) bearings off a small moped crankshaft, and i'm glad i have it because i'll use it for that purpose many more times. seems very strong and the blades are thin enough to grab into tight spaces. i didn't have a puller wide enough to fit in the holes, so i used a large 2-jaw puller and just grabbed onto the splitter, and it worked fine. would probably be easier with an appropriate puller that you can thread into the holes, as long as the threads don't strip out on really stuck bearings. i assume they won't but i can't say.
3.0 out of 5 stars
Works OK,
Amazon Verified Purchase(What's this?)
This review is from: OTC 1122 1/8" to 2" Bearing Splitter (Misc.)
I needed this for 1 rear wheel bearing job on a 4Runner to try and reuse the ABS ring. I got it off without cutting it but it got bent in the process so I wound up replacing it anyhow. But I have used it to pull a few pinion bearings and it worked better for that. It works OK for the price but if I were a pro I wouldn't bother with this one.
5.0 out of 5 stars
great puller,
Amazon Verified Purchase(What's this?)
This review is from: OTC 1122 1/8" to 2" Bearing Splitter (Misc.)
I used this splitter to pull thin bushings off a long shaft combined with a 13" puller. Works great!! Well made and tough, no wear after pulling several hundred bushings
4.0 out of 5 stars
Nice little widget,
By
Amazon Verified Purchase(What's this?)
This review is from: OTC 1122 1/8" to 2" Bearing Splitter (Misc.)
This splitter did the job for me. I don't know how I would have gotten the bearing off without it. If the need comes up for a splitter with a different size I will not hesitate to buy one from OTC
|
|
Most Helpful First | Newest First
|
|
$44.95 $29.64
In Stock | |
 
| ||
