- Push-button, single-point calibration with five, preset ranges at most used values for a wide range of results
- Customizable cell constant and Automatic Temperature Compensation (ATC) for accuracy
- Hold function for ease of recording readings
- Auto/off function that shuts the meter off after 20 minutes of nonuse
- Includes conductivity/TDS/temperature probe (K=1.0)
Oakton Acorn CON 6 Portable Conductivity Meter, with Probe
We don't know when or if this item will be back in stock.
Specifications for this item
|Number of Items||1|
|Measurement Type||Electrical Conductivity , Total Dissolved Solids (TDS) , Temperature|
|Outside Diameter||0.625 inches|
|Overall Length||5.1 inches|
|Overall Width||36 inches|
|Size||Temperature Range -10.0 to 110.0 degrees C|
The Oakton 35606-10 Acorn CON 6 portable conductivity meter is a handheld, waterproof and dustproof meter that comes with a probe (K=1.0). The meter is commonly used to measure conductivity and temperature of a substance in pure and sea water testing, and in laboratory and industrial applications. This meter features push-button, single-point calibration with five, preset ranges at most used values for a wide range of results. It has a customizable cell constant and ATC for accuracy, as well as choice of manual compensation. It has a “hold” function for ease of recording readings, and an “auto/off” function that shuts the meter off after 20 minutes of nonuse. The meter comes with a conductivity/TDS/temperature probe (K=1.0), and a protective rubber boot for meter protection against environmental conditions with a built-in stand for benchtop or long-term use.
The 35606-10 meter has a conductivity range of 0 to 20.00, 200.0, 2000 μS/cm; 0 to 20.00, 200.0 mS/cm, resolution of 0.01, 0.1, 1.0 μS/cm 0.01, 0.1, S/cm, accuracy + or - 1% full-scale. Temperature range -10.0 to 110.0 degrees C (14.0 to 230.0 degrees F), resolution 0.1 degree C (0.1 degree F), accuracy + or - 0.5 degrees C (+ or - 0.9 degrees F). ATC up to 5 points (per range). Temperature coefficient 0.0 to 3.0% degrees C, normalization temperature 20.0 degrees C and 25.0 degrees C (selectable). The meter is 5.5(l) x 2.7(w) x 1.3(h) inches, and weighs 0.9 lb. It has up to 100 hours of continuous use with four 1.5-V AAA batteries (not included).
Conductivity meters measure the ability of a material or solution to conduct an electrical current, and are commonly used in hydroponics, aquaculture, agriculture and laboratory applications.
Oakton Instruments manufactures an array of scientific instruments for research, industrial, and educational uses. Since 1991, Oakton has distributed a wide variety of instruments such as meters, electrodes, and transmitters. Oakton is based in Vernon Hills, IL, and has facilities in Europe, Asia, and China.
What’s in the Box?
- 35606-10 Meter
- Protective rubber boot