OptoTermCable is a power adapter (120VAC/60Hz to 13.5VDC at 1.7A) and 6.5 ft (2 m) serial cable used with Opto 22's OptoTerminal-G70 and OptoTerminal-G75 color touch-screen display terminals. This cable is convenient for programming an OptoTerminal on a desk or location other than the final location where the terminal will be installed. (Typically a custom cable is used at the final installation site to match available power and equipment requirements.) Opto 22's OptoTerminal family brings a programmable, Ethernetenabled, graphics-based operator interface to any location with Opto 22 SNAP Ethernet systems, including those using SNAP PAC programmable automation controllers and SNAP-IT packaged systems. OptoTerminal mountable display terminals are used by operators to send commands to and receive real-time data from plant floor equipment and other devices connected to Opto 22 hardware. Ideal for automation, control, data acquisition, and remote monitoring, an OptoTerminal offers a compact and durable operator interface for the plant floor and remote locations. Power: 120VAC/60Hz to 13.5VDC at 1.7A Communications: 6.5 ft (2 m) RS-232 serial, DB9 to DB9.