38" x 50" x 10" high. Buckskin Tan. #1) The materials and thread that I use are mildew, sunlight, stain resistant and highly water-repellant. My beds feature high tear strength, puncture and abrasion resistant. #2) The edge is finished with marine binding at the corners of the pet cot. Also all other edges are finished. #3) Non skid-pads" for the feet. Will not move when your dog gets into it. #4) The frame of the pet cot is made with schedule 40-pvc industrial grade pipe for frame of dog bed and legs with furniture grade fittings. No parts on the pet cot will corrode. #5) It's very easy to clean. Just hose off and air dry. I will also give you cleaning instructions for washing and drying. #6) The pet cot will come disassembled. The only tool that you will need is a rubber hammer to put the pet cot together. The pieces will go on tight and will stay intact. Easy instructions with pictures included. #7) To get the right pet cot: Measure from the tip of the nose to the rear where the tail starts, when your pet is lying down. Add at least 4 inches to 6 inches to the measurements to get the right size pet cot. If not sure go to the next size. I have been using this material for years. Can be used for inside or outside. This pet cot is made out of schedule 40 1 1/4" pipe. Please Note: The height of this pet cot is 10" off the ground. Color displayed on your monitor may not reflect the true color and texture of this purchased. Information Sheet. Top Gun Canvas is a 4 ply acrylic-polyester canvas. The material is mildew, sunlight, stain resistant and highly water-repellant. My beds feature high tear strength, puncture and abrasion resistant. Shrinkage & stretch. Only 1% Will not harden, crack or peel after outdoor exposure or when subjected to temperatures below 0* F. Weight: 11oz per square yard.
Image not available for
- Sorry, this item is not available in
- Image not available
- To view this video download Flash Player