P3 International P4460 Kill A Watt EZ Electricity Usage Monitor

Other products by P3 International

Product Details

• Product Dimensions: 1.5 x 2.2 x 5 inches ; 6.4 ounces
• Shipping Weight: 1 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• ASIN: B000RGF29Q
• Item model number: P4460
• Average Customer Review: 4.3 out of 5 stars See all reviews (161 customer reviews)
• Amazon.com Sales Rank: #105 in Electronics (See Bestsellers in Electronics)
• Date first available at Amazon.com: October 26, 2006

Product Description

Product Description
Now you can cut your energy costs and find out what appliances are actually worth keeping plugged in. Simply connect these appliances to the Kill A Watt EZ, and it will assess how efficient they really are. Large LCD display will count consumption by the Kilowatt-hour, same as your local utility. Calculate your cumulative electrical expenses and forecast by the day, week, month, even an entire year. Also check the quality of your power by monitoring Voltage, Line Frequency, and Power Factor. Now you’ll know if it is time for a new refrigerator or if that old air conditioner is still saving you money. With the amazing Kill A Watt EZ you’ll know "Watts" killing you.

Customer Reviews

Most Helpful Customer Reviews

200 of 211 people found the following review helpful:

4.0 out of 5 stars P3 International P4460 Electricity Usage Monitor, July 22, 2007

By	J. Shandelman (New York) - See all my reviews (REAL NAME)

I give it **** because it could use a few improvements.
NOT because it didn't perform as expected.

Bottom line - great device. Works exactly as advertised.
I would recommend it to anyone interested in getting a
handle on actual electricity consumption and costs.

Best feature: The ability to enter your own actual cost per KwH
as taken from your utility bill.

Worst Feature: No battery backup for reading the collected data once
unplugged from the wall outlet. You have to plug the unit
back into the wall outlet to read the collected data.

Suggestions to the manufacturer:

1. Add a battery so the display can be read when not plugged in.
2. Include a short 12-14 inch extension cord so that you don"t have


crane your neck when reading the device while plugged into the wall


outlet. Some outlets are only 12-24 inches off the floor.
3. Make it 110/220 capable for 220V appliances.
4. Add a memory feature with a USB port to download and plot the data
over time in a spreadsheet.
5. Keep the price the same :-)

101 of 104 people found the following review helpful:

5.0 out of 5 stars P4460 is great for electical circuits that loose power., October 18, 2007

By	John Avenson (Westminster, CO USA) - See all my reviews (REAL NAME)

I currently own two Kill-a-Watt P4460 meters. This usage meter has a memory hold over, so I can use these at circuits that are switched on and off. When the incoming electricity is shut off, the previous hours of use are kept in memory. When the electricity is turned back on, the meter will continue from where it left off. The older P4400 model does not have this hold over circuit. The P4460 is a great addition to the P4400 for studying home electical usage.

125 of 132 people found the following review helpful:

1.0 out of 5 stars original better than new version, July 13, 2008

By	Mal "NC4L" (Florida) - See all my reviews

I have owned the original Kill a Watt for several years and find it to be a wonderful device with a few exceptions, however, the new updated unit is terrible.
The first and most important problem is that the display is not viewable unless you get down on the floor and use a flashlight. LCD displays have angles for best viewing and this one as most others are usually below the horizon of the display - so best contrast and readability occurs if you are looking up at the display from beneath it. In addition the mask for the display cuts off the top and prevents readings from any normal position.
Secondly the enunciators (labels that tell you if it is volts or amps) are tiny - so you not only need to get down on the floor with a flashlight but you need reading glasses as well to know which parameter the numerals represent.
I am fully cognisant of the fact that there is a memory and you can pull the item out of it's receptacle for a more convenient and better lit area. But where do you find one of those - no one places recepticles over head or at eye level that I know of - they are all about 1 foot off the floor. In addition the instantaneous reading of current (= not the electrical term) watts, or current volts, or amps is not memorized and pulling the device out of its working recepticle obliterates any instantaneous factor readings taken when you were measuring the device.
There are certainly many better ways to do the display - for instance locating the display on the top of the unit facing up. In addition a backlight could be added. And the parameters could be larger and clearer. In that way all you would have to do is bend down to find out your information.
I also find the menu system and toggling a big nuisance. The older unit was much easier to use. Each button had its own function. The readings were clear and straight forward - what you pushed was what you got. Now the menu and toggling system is obtuse, and time consuming. In addition in my unit the press switches did not work correctly - with sometimes nothing happening and other times it would jump three pushes with just one touch.
A last criticism is that the display should stay on when the unit is out of the wall. A small watch battery should be able to provide years of a nice contrasty display.
To sum thing up - I am very dissatisfied with its viewability and readability. It is very inconvenient to use. I am also dissastified with the logistics of the menu system - as it is haphazard and very poorly thought out. And I am dissastisfied with the control buttons which are intermittent and jumpy.
I will be returning my unit.