- Sorry, this item is not available in
- Image not available
- To view this video download Flash Player
|Price:||$4.16 ($4.16 / Each) & FREE Shipping on orders over $35. Details|
|You Save:||$1.33 (24%)|
The PC Products PC-Woody is a two-part epoxy paste used to replace missing or rotted wood in indoor and outdoor applications. After maximum curing, the product is stronger than most wood and provides resistance to mildew, dry rot, UV light, and fresh and salt water, as well as chemical resistance in pressure-treated wood. Mixing the two parts forms a paste that has a working time of 30 to 40 minute (at 70 degrees F), allowing time for adjustments. The paste has high tack to help reduce drips or sags while hardening. After the PC-Woody is fully cured, it can be painted, stained, and machined. It is nonconductive and nontoxic after curing.
|Application temperature range||35 to 115 degrees F|
|Service temperature range||-20 to +200 degrees F|
|Working time||30 to 40 minutes (at 70 degrees F)|
|Cure time for service||Overnight (dependent on temperature, humidity, and application size)|
|Full cure time||1 week (dependent on temperature, humidity, and application size)|
Protective Coating Company manufactures products to repair and restore various materials, including wood and concrete. The company, founded in 1954, is headquartered in Allentown, PA.
I needed desperately to fill a hole for a hinge screw - I did it, but this stuff is very tough to use because it's so sticky, worse than peanut butter. Read morePublished 22 days ago by B.O.B.
Cleared out some severely rotted wood on exterior window sills, mixed up the PCs and filled in the gaps. Read morePublished 29 days ago by ricksblain
When used vertically it sags, the consistency is difficult to work with (would be better if it was a little thicker like play dough instead of peanut butter), was hard to smooth it... Read morePublished 1 month ago by Cindy Hause
I hope to have entirely epoxy house some day so water and bugs will no longer scare me. Yes, I bought the money pit and this has been a house saver for the overly abundant areas... Read morePublished 1 month ago by DJ
It worked just as advertised. This was my first experience using an exterior putty. I filled gaps and rot in exterior wood prior to painting. I recommend.Published 1 month ago by B. Mcanally
Dries very hard, though it is easy to sand. Repair work completely disappears under paint.Published 1 month ago by Louis Kibby
I was a bit concerned at first when I read about the fast set-up time, but the product does tell you that you can slow it down by using a small amount of white vinegar. Read morePublished 1 month ago by Janet Macleod