Frequently Bought Together
What Other Items Do Customers Buy After Viewing This Item?
| Height (inches): | 1.50 inches |
| Width (inches): | 2 inches |
| Weight: | 6.40 Ounces |
Technical Details
- Output Standard: PAL/NTSC - Video Output: RCA 1.0 VppComposite Video @ 75 Ohm
- High Resolution: 380TV Lines x 60 Fields - Power Supply: DC 12 V > 75 Ohm
- Image Sensor: Ov 7910 Color CMOS - Temperature: -10-50˚ Celcius
- Lens: 6mm 92˚ - Unit Dimensions: 1.3''(H) x 8''(W) x 1.26''(D)
- Low Light Illumination: 1.5 Lux/F1.2
Product Details
Would you like to update product info or give feedback on images?
|
Product Description
From the Manufacturer
Backup Camera That Fits Easily above Your License Plate
The Pyle PLCM10 is a backup camera featuring CMOS Sensor Technology and more. It mounts easily above your license plate so you can install it without any permanent vehicle modification. Thanks to using the latest in backup camera technology, it outputs crystal clear video over an RCA jack. Connect it to a monitor in your car, and you'll be able to see everything behind you on the screen!
Bicyclists, children, and pedestrians will have nothing to fear when you've installed this affordable, high-quality camera to your vehicle. It's also perfect for backing into tight spots or moving in reverse when visibility is limited – the camera acts like a third eye hovering just above your rear bumper. And that's not all – this model comes with night vision LEDS, which illuminate the area behind you at night.
This small and durable unit will keep you and your family safe and secure because you'll always know what's going on around you.
See Where You’re Going – Even in the Dark
The PLCM10 features night-vision LED lights, which light up the area around your camera, helping you see easier in the dark.
Weather Resistant Housing
Your camera is protected from the elements since it's built with weather protected housing. That way you can drive safely no matter the weather.
Mounts Easily on Your License Plate
The PLCM10 can be installed easily on your existing license plate mounting locations, and is suitable for both top as well as bottom mount on the license plate.
RCA Output
This camera also features RCA video output for connecting to other source inputs. Use your camera with a review mirror monitor, an existing in-dash TV, a DVR, or any other RCA-compatible video input.
Product Description
Customer Reviews
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
50 of 50 people found the following review helpful:
4.0 out of 5 stars
Good value, average performance,
By
This review is from: PYLE PLCM10 License Plate Mount Rear View camera with 0 Lux Night Vision (Electronics)
Bottom line up front: Don't expect a $30 CMOS backup camera to perform like your $600 camcorder.
This camera is good for the price. I installed it rather quickly in conjunction with my Pioneer AVIC-Z110BT. It added a Pyramid 10-amp noice filter ($3) as close to camera as possible to ensure it got clean power. It works fine. I can see anything behind me, day or night. Between the IR illuminators on the camera and your backup lights, anything close enough to be of concern at normal reversing speeds are illuminated. After careful aiming, I know right where the "sweet spot" is for backing closse to other car's bumper and other obstacles behind me and still have a save 6-12" buffer. I now get in and out of tight spots with ease. Important notes: - Don't expect this to look like HDTV. It's a $30 CMOS camera. - Use the $3 noise filter. - Route your cables carefully. You should ground the negative lead as close to the camera aspossible and run the positive lead to your choice of power supply (the reverse lights, of you want the camera on only when you're backing, or an accessort power, if you wnat it on when the car's on - as in my case where my head unit has a "rear view" mode for viewing trailers and such while moving forward). If conecting to accessory power, you'll likely have to extend the cable to the front of the vehicle. Keep it a few inches from the from the video cable, and make sure both the video and power cable cross each other and other cables at 90-degrees, and avoid parralle runs. Also, be prepared to extend the video cable. I had to add a 6-foot extension to mine in order to get it to reach the head unit. I don't understand wht someone would spend over $100 for a higher quality camera for the purpose of just backing up, unless they're using it for some sort of high-speed reversing and/or using a really large screen, in which case I would personally use a 0 lux securty-type camera with a differnt mounting location.
11 of 12 people found the following review helpful:
5.0 out of 5 stars
great product, great seller,
Amazon Verified Purchase(What's this?)
This review is from: PYLE PLCM10 License Plate Mount Rear View camera with 0 Lux Night Vision (Electronics)
Installed on 2011 f250 with a pioneer avic-f700bt reciever. Camera works great, perfect picture and easy to install.
26 of 32 people found the following review helpful:
1.0 out of 5 stars
Crap quality,
This is the worst camera to buy. I bought it and had to return it. No night vision no low light cabably as stated and even in the morning it has very dark picture. People and other object look almost black and white. Hooked up to two diffrent tv systems and same results do not buy this camera.
Share your thoughts with other customers: Create your own review
|
|
Tags Customers Associate with This Product(What's this?)Click on a tag to find related items, discussions, and people.
|
