| Height (inches): | 4.75 inches |
| Width (inches): | 13.25 inches |
| Weight: | 9.7 Pounds |
Product Details
Would you like to update product info or give feedback on images?
|
This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool--it's completely waterproof. This four-channel, 1000-watt bridgeable marine amp takes both high- and low-level inputs, so it's compatible with a variety of head units and sources. Use in stereo, or double the power by bridging inputs. Comes with variable electronic crossover network, variable bass boost, and variable gain control for total control over your sound. A blue LED level display lets you keep an eye on your signal, and for protection, you can count on the thermal, overload, and short circuit protection. Runs on 12 volts DC.
The PLMRA420 features gold-plated low-level RCA inputs for sources that use RCA-type connectors. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level MOLEX inputs.
Adjust the line level input for the least amount of distortion to match your source unit.
Add a little low-end boost with selectable bass boost of up to approximately 18dB at 60Hz.
Optimize the output to match your speakers exactly, using the variable high-pass and low-pass frequency controls.
Route the output of the low-pass or high-pass filters or the full signal to the internal power amplifier, or the full range if preferred.
Protect the amp and your vehicle's electrical system from short circuit conditions with built-in fuse protection, along with overload, thermal and short circuit protection. LED lights indicate if the amp has gone into a protection mode. Finally, an anti-thump turn-on feature protects your speakers during power-up.
| Power Rating: | 250 Watts x 4 Maximum Output at 4 ohms 35 Watts x 4 RMS at 4 ohms 50 Watts x 4 RMS at 2 ohms |
| T.H.D: | < 0.04% |
| S/N Ratio: | > 95dB |
| Power Supply Voltage: | 14.4V DC Neg. Ground (10.5-16V) |
| Frequency Response: | 15 Hz-30 KHz |
| Input Impedance: | Low Level: 10K Ohms High Level: 100 Ohms |
| Input Sensitivity: | Low Level: 250mV High Level: 2.5V |
| Dimensions: | 10.9 x 2.7 x 12 Inches (L x W x H) |
Pyle PLMRA420 Amplifier, Mounting Hardware, User's Manual
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
5 of 5 people found the following review helpful:
4.0 out of 5 stars
Great amp for the $$$,
By
This review is from: PYLE PLMRA420 4-Channel 1,000-Watt Waterproof Marine Bridgeable MOSFET Amplifier (Electronics)
Good amp for the money, definitely not a true 1000 watt amp as I already knew before hand. Amp is new but I am impressed it looks great and puts out enough power to run all my speakers!
3 of 3 people found the following review helpful:
5.0 out of 5 stars
Worth the Money,
By
This review is from: PYLE PLMRA420 4-Channel 1,000-Watt Waterproof Marine Bridgeable MOSFET Amplifier (Electronics)
This is the 2nd time we have purchased this amp. Had one in our old boat and just put 1 (may put a 2nd one in as well) in our new boat. You get a lot of bang for you buck with this amp, you will not be able to beat the quality for the price!!
1 of 1 people found the following review helpful:
4.0 out of 5 stars
Bang for your buck,
By Smogg Monster "Smoggy" (Palo Alto, CA) - See all my reviews
Amazon Verified Purchase(What's this?)
This review is from: PYLE PLMRA420 4-Channel 1,000-Watt Waterproof Marine Bridgeable MOSFET Amplifier (Electronics)
Bought this amp to drive 2 10in subs in my boat....wasn't looking for a high end clean sound. just something cheap and with enough power to push some bass out over the sound of my motor while wake boarding. Good deal for the money!
Share your thoughts with other customers: Create your own review
|
|
Suggested Tags from Similar Products(What's this?)Be the first one to add a relevant tag (keyword that's strongly related to this product).
|
|