PMS Products T900DP Boeshield Rust Prevention and Lubrication for Tools and Hardware

by PMS Products, Inc.

Product Description

From the Manufacturer

Billing itself as the "Industry's Best-Kept Secret For Shop Lubricants Since 1939," Boeshield T-9 is a solvent and paraffin wax formula developed by Boeing Aviation for long-term metal protection. It can be used on all tool surfaces where sliding, lubrication, and protection are needed. Boeshield T-9 penetrates into metal pores, displaces moisture, and dries to a thin film that will protect equipment for months. Since it contains no silicone or Teflon and dries completely within a few minutes, it will not pick up on wood surfaces or interfere with subsequent finishing. You'll also get Rust Free, an easy-to-use cleaner for removing stains and surface rust that can be used on steel, cast iron, stainless, fiberglass, chrome, tile, and more; and Blade and Bit, which removes resin, gum, and pitch, and can be used on saw blades, router and drill bits, knives, planer blades, tool tops, and cutting tools. Your three-piece package contains an 8-ounce Rust Free pump spray, 12-ounce T-90 aerosol, and 8-ounce Blade and Bit. Cannot ship by air.

Product Description

Our Large Total Tool Care Kit includes the 12 ounce T-9 Rust Protectant Spray, 8.45 ounce T-9 Rust Free Pump Spray and 8.45 ounce Blade and Bit Cleaner Pump Spray.

Product Details

• Product Dimensions: 8 x 1 x 3 inches ; 2.2 pounds
• Shipping Weight: 2.3 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B0000223U8
• California residents: Click here for Proposition 65 warning.
• Item model number: T900DP
• Average Customer Review: 3.9 out of 5 stars  See all reviews (11 customer reviews)
• Amazon Best Sellers Rank: #72,530 in Home Improvement (See Top 100 in Home Improvement)
  • #98 in Home Improvement > Power & Hand Tools > Power Tool Accessories > Lubricants

Customer Reviews

Most Helpful Customer Reviews

30 of 30 people found the following review helpful:

4.0 out of 5 stars Rust preventer alone makes this a great package, February 3, 2000

By 

John T. Conklin (South San Francisco, CA USA) - See all my reviews

This review is from: PMS Products T900DP Boeshield Rust Prevention and Lubrication for Tools and Hardware (Tools & Home Improvement)

I'm located a few miles from the Pacific Ocean, and was having a difficult time preventing rust from attacking my table saw, jointer, and planer even though I frequently applied silicone-free paste wax to the cast iron surfaces.

I first used the "Rust Free" product to remove the surface rust. It's an acid solution, and caused a bit of irritation even though I had plenty of ventilation. My tools had only a very thin layer of surface rust, and the product removed it effortlessly. However, due to its caustic nature, I think I'll go back to my old rust removal method of a kerosene and a rag if I have to deal with similar conditions. But if I'm ever faced with more severe case of rust, I know what to use.

I then sprayed a think layer of "Boesheild T-9" on the cast iron; left it overnight; and wiped it off the next morning. The excess was somewhat difficult to remove --- very sticky and waxy. But it was well worth it! I haven't had a spot of rust on any of my tools in the three months since I first applied the product. I would have had to apply paste wax several times during that time, and it's likely that a few spots of rust would still show up.

I've only used the "Blade & Bit" product once. It easily removed the pitch buildup from my saw blade . Like "Rust Free", it's somewhat caustic and an irritant. Use it with good ventilation. I think I'll stick with "Simple Green".

26 of 26 people found the following review helpful:

4.0 out of 5 stars Boeshield T-9 is best by itself, June 7, 2002

By 

edfan "edfan" (Southern California) - See all my reviews

This review is from: PMS Products T900DP Boeshield Rust Prevention and Lubrication for Tools and Hardware (Tools & Home Improvement)

I've been using T-9 for some years. Of the three items, the T-9 is really worth the cleaner and rust buster put together. It's too bad they're selling the kit and not T-9 by itself.

The rust cleaner is average. Flitz cleans better and is more versatile. The blade cleaner did clean but certainly not nine dollars better than a few ounces of Oil Eater, which cleaned gummy blades and bits lots faster.

T-9 RULEZ when it comes to keeping rusty crusty away from anything metal. It was even a good defense against a male dog's dislike of a metal bench and handtruck kept outside. It does stay sticky a long while so don't spritz and expect it to be instantly usable. Wet T-9 can stain cardboard boxes and fabric. The best anti-rust protection comes after letting it dry in a thick film.

I don't like T-9 on machine table tops except for storage, where it is the best thing EVER. It's sticky though. You have to clean hard before you can use the tool. The goo can get on wood and it takes strong solvent to get it out. If you live near salty water exposure, there's nothing better.

14 of 15 people found the following review helpful:

5.0 out of 5 stars Part of a Good Maintenance Program, September 4, 2001

By 

"gluehappy" (Lutz, FL United States) - See all my reviews

This review is from: PMS Products T900DP Boeshield Rust Prevention and Lubrication for Tools and Hardware (Tools & Home Improvement)

My first exposure with this product produced good results to remove the rust and soil stains from my table saw.

The Rust Free contains a mild acidic base. Several applications were necessary to remove all the rust and soil stains. Good ventilation should be provided to avoid the fumes. I had a problem with the spray bottle freezing up on me from so much pumping. I had to "rest" it for a few seconds and then continue pumping every now and then. The use of a spray bottle in this case is not such a good idea since it is hard to be accurate spraying an acidic solution--getting it on the paint is inevitable. I switched to a small sponge instead, the sixe of a half dollar, which worked very well and much faster. I could see the rust and soil stains being lifted off with each application.

I sprayed two light coats of the T-9 after the cleaning and the results were immediately apparent--the table saw looked brand new. I have also been using the T-9 on the shafts of my router bits to keep the rust away.

The Blade and Bit cleaner works as well as the household cleaners I have been using to clean the pitch from my blades.

The real value in this product is the T-9 protection. With it you can keep rust away far better and far longer than just using paste wax. Just give it a good cleaning first with the Rust Free and you've got a very good maintenace program with this set.