This Porter-Cable brad nailer and compressor kit is a smart starter set that will have you up and running in just a few minutes. The kit includes an 18-gauge brad nailer; a 2-horsepower, 6-gallon, oil-free pancake compressor; 25 feet of 300 psi air hose; male and female couplers; Teflon tape; oil for the nailer; and 1,000 brad nails. The brad nailer is a compact, no-nonsense unit that might not be as stout as other (more expensive) nailers, but it's reliable and does its job well. It shoots standard brads from 5/8 to 1-1/4 inches long, and includes a sequential fire trigger, a safety that's located behind the driver guide for driving brads in tight spaces, easy-to-use depth adjustment, a directional exhaust port, a removable rubber nose, and a rugged plastic carrying case. The compressor is easy to transport, but still offers plenty of capacity. It produces 135 psi and has a 6-gallon capacity, enough to support heavy use of brad and finish nailers or moderate use of framing nailers. This is an oil-free unit, and its advanced Teflon coating doesn't require maintenance--a big plus on the convenience scale. The compressor's 120-volt universal motor starts easily in cold weather and draws only 10 amps--so you won't have to worry about tripping breakers inside residential homes--and you can use it with an extension cord. It also includes a high-flow regulator and an easy-to-read air pressure gauge. Overall, this combination kit offers two solid pieces of equipment at a very competitive price. It's a great way to get into air-powered tools. --Jonathon Tudor
From the Manufacturer
Porter-Cable created the perfect All-In-One-Kit! The CF2600, Jetstream, 6-gallon pancake compressor is combined with the BN125A, 18 gauge 1-1/4 inch brad nailer kit. The compressor has a 15 amp, 120 vac 2-hp motor, with an oil-free design for less maintenance, and the ability to run on standard household current. The compressor produces 3.7 scfm at 40 psi and 2.7 scfm at 90 psi. The brad nailer has a quick-release nose piece, a hardened driver blade, depth drive adjustment, a durable rear-load magazine and a muffled exhaust port. Includes compressor, brad nailer, carrying case, pack of 1,000 brad nails, 1/4-inch male quick coupler plug with dust cap, oil, allen wrenches, 3/8-inch by 25-foot hose, fittings, Teflon tape, and operator's manual.
- Uses standard 18 Ga. Brad nails from 5/8" to 1-1/4"
- 3.7 SCFM @ 40 psi - 2.6 SCFM @ 90 psi
- Tool-free quick-release nose piece
- Hardened driver blade
- Tool-free depth-of-drive adjustment
- Durable, side-load magazine
- Muffled, adjustable exhaust port
- 15 Amp, 120 VAC, 2 Peak HP motor
- Oil-free design for less maintenance
- Ability to run on standard household current
- Standard Equipment: Nailer #BN125A, compressor, 25' air hose (300 PSI) with ferrules on both ends #60225, 1/4" male #60401 and female #60405 quick couplers, Teflon® pie joint tape, 1000 brad nails, oil, wrenches, carrying case, and operating manual
One-year warranty with 30-day performance certification.