Designed to meet the ever increasing demand to homogenizer many samples without the risk of cross contamination and eliminating the need to spend valuable time cleaning the generator between samples, the MULTI-GEN 7 generator was developed. The MULTI-GEN generator system is available as part of MULTI-GEN Homogenizing Package, Deluxe Version. Included in this package is the Bio-Gen PRO200 hand-held homogenizer, MULTI-GEN adapter, MULTI-GEN generators (12-pack), Bio-Gen PRO200 stand assembly and MULTI-GEN ejector clamp. The Bio-Gen PRO200 homogenizer is a hand-held homogenizer with variable speed from 5,000 to 35,000 rpm. A separate ON/OFF switch conveniently allows for the slide switch speed control to remain at your ideal homogenizing speed. MULTI-GEN generators are approximately 7 x 75mm and unlike other quick-change systems, are manufactured out of 316 stainless steel, making them ideal for processing difficult samples, including tough tissues as well as being highly chemical compatibility. They are precision crafted with a very narrow clearance between the inner rotating shaft and outer tube/chamber, which allows for quick, effective and repetitive processing, meaning you will get the results you want each and every time. MULTI-GEN generators are easily taken apart in seconds and cleaned between samples. Appropriate cleaning procedures include chemically cleaning, autoclaving and flaming. MULTI-GEN generators can be reused an unlimited number of times. With the MULTI-GEN motor adapter, generators quickly lock into place. When homogenization is complete, hands free ejection of the used generator minimizes the chance of accidental contamination. The Bio-Gen PRO200 stand assembly features a 7 x 10 inch vinyl-padded base with 24 inch post and easy-lift mechanism. For further ease of use the MULTI-GEN ejector clamp may be attached to the Bio-Gen PRO200 stand assembly so you can avoid touching the MULTI-GEN adapter.