Customer Reviews

PSP Traveler Case

5 star:		(29)
4 star:		(13)
3 star:		(15)
2 star:		(6)
1 star:		(3)

 

 

I bought both the Logitech and the Sony polycarbonate cases. While I like the idea of the added polycarbonate screen protector (which was nicely designed to rest just above the PSP screen so not to directly touch it), the holders for 2 UMDs and 2 Memory Sticks, and the strategically placed rubber bumpers, I have to say that in my opinion, the Logitech case wins out by a nose.

The Sony case does hold the PSP tighter, and with the screen protector in place, it will not allow the PSP to fall out. This could be a major deciding factor for some folks. However, my issue with the screen protector is that it is way too difficult to disengage from covering the PSP (basically you are supposed to push in the latch, but the case is so "form fitting" that there is no extra room for the PSP to move so as to let the latch unhook). This makes it much more of a pain to change out UMDs because neither case will let you do that without removing the PSP from the case.

The other issue I have noted with the Sony case that does not occur with the Logitech case is that the opening for the headphone jack on the Sony case is located just slightly off from where it needs to be (it is too high). This has the unfortunate effect of forcing you to raise the PSP in the case slightly, which for me puts the PSP screen in contact with the polycarbonate screen protector (a scratch just waiting to happen). It is possible that my case is slightly defective, and that others have not had this problem, but since I did, it has to be part of my review.

So all in all, I think the Sony PSP Travel Case is definitely worthy, and if you won't be changing UMDs frequently, I think it is very comparable to the Logitech case. However, the difficulty in disengaging the screen protector and the issue with the headphone jack opening makes the Sony case my second choice for my PSP.

This is a clear, polycarbonate case to protect your precious investment. It is very similar to the very popular Logitech Playgear Pocket. Both cases are made of a highly durable, clear polycarbonate material. Both are form-fitting, with access holes in the right places that allows you to play with your PSP while it is safely protected inside the case. The Sony PSP Travel Case is a little bit larger than the Logitech. Inside the case is a specially formed rubber material that holds your PSP securely. This material helps protect your console from external shock. It is larger than the Logitech due to the fact that it has room to carry two UMDs inside.

I chose this case over the Logitech because it has a screen protector that is built into the case. This screen protector also holds down your PSP and keeps it in place even when the case cover is open. As long as the screen protector is closed and locked down, the PSP will not fall out even if you turn the case upside down with the case cover open. In my view, this is an important extra measure of protection. These cases were designed to hold the PSP at all times. They have access holes in the right places so that you can play with your PSP while it is safely inside.

At first, it will be awkward to operate your PSP while it's in the case. The open cover can sometimes touch the knuckles of your third finger while you're holding the case. And the case is heavy. If you're used to operating a naked PSP, the extra mass will take some time to get used to. However, think of it as body armor for your Sony. Just as a real bullet-proof body armor can save the life of the person wearing it, this case can save the functionality of your PSP. Basically, the biggest threat to your PSP is getting dropped. It only takes one drop, one accident, to turn an elegant PSP into a broken brick. I view my Sony PSP as a long-term equipment and therefore, not something disposable. I am willing to take the time and allow myself to get used to the case. There is a trade-off between convenience and protection. It is up to you to decide where that trade-off is for you.

I have not performed a "drop test" on the unit. I cannot tell you that your PSP will survive a five-foot drop on pavement. There are way too many variables and too many things can happen that affect whether your PSP will survive an accidental drop. I have not performed the "careless 200-pound younger brother who accidentally sat on my PSP" test. The only test I've done is to stack a 50-pound pile of books on top of an empty case to see if it will break. I'm happy to say that the case survived just fine. The anecdotal experience of one user doesn't mean that your experience will have the same outcome. The best advice is to always be aware of where you choose to operate your PSP. Standing in the middle of a concrete driveway while playing a game is always a bad idea. That scenario presents too many opportunities for you to drop your unit. And it's not reasonable to think that your polycarbonate case is guaranteed to keep the PSP safe in the event of every accident. If you only play with your PSP while sitting on the living room couch, then it may be overkill to keep it in this case at all times. Where you play, how careful you are, and how much you value your Sony will determine the level of protection you need.

- Identical length and width; the Sony PSP case sits about .5 inches higher when closed

- Logitech case has a stiff lid, meaning you can open it partially like a car sun visor to keep out light if in the sun; Sony case lid is completely loose

- Sony case has screen protector that, as previously mentioned, absorbs some scratches and is difficult to open

- Sony case lid has space for two UMD games/movies and memory stick

- Sony case has rubber feet in strategic places, such as on lid lip when propped open to view a movie (great for airplanes in turbulence)

I have used both and as a traveler prefer this case; I can watch movies on a tray table without the PSP sliding around and can pack two games/movies plus any MP4 videos on a memory stick in the same case. Airplanes are typically darker so I don't notice the scratches on the screen guard at all either. Your needs might be different, which would make the Logitech case a better choice for you.

For Xmas I received a PSP 2000 (PSP Slim) as a gift and wanted to protect my investment. After reviewing many cases for the PSP I chose this case. I liked the idea of being able to hold extra UMDs and Memory Cards and also hold my PSP securely in place while using it in the case. This case does all of these things exceptionally.

My only issue with the case was that the PSP 2000 is too small to have the screen latch in place securely. Other users suggested placing a small piece of fabric to make the PSP 2000 fit more snuggly and latch the screen in place. I tried this and ended up damaging the screen. The fabric was too bulky (my fault) and caused the screen to press against the top of the case and the UMDs I had in it and I now have 2 deep, round scratches in the case's screen. My PSP 2000 screen is still perfect though but it is hard to see the screen through the scratches. I did, however, find an alternate means of getting the PSP 2000 to fit snuggly into this case and protect it even better.

Sony PlayStation Portable Slim (PSP) JAVOSkin - The Soft Low-Profile Case (Black) is a glove for your PSP 2000 ONLY! This combined with the PSP Travel Case makes the PSP 2000 fit snug and helps protect the PSP even better.

As for the Headphone slot, just take an ice pick and heat it up and melt a hole big enough to fit your headphones in. I also read about the screen being hard to unlatch due to the fact that the PSP fits so snuggly that it doesn't give you enough room to open it without fear of damaging your screen. I have never had this problem. Maybe it is because I open the latched screen a different way. Instead of pressing the latch against the PSP, I press the bottem of the PSP (where the power jack on the right and the lanyard loop on the left is) up with my thumbs away from the latch while placing my index fingers against the case right next to the right and left bumpers. This pops the latch out of place due to loss of pressure (which is what keeps the latch in place).

This case has been through Hell and back! I'm in the Army in Iraq and carry my PSP wherever I go. It sits in my pocket and when I get some downtime I can pull my PSP out and watch a movie or play a game. The case has deep scratches on it, stains and has been slammed by my rifle as well as sat on, kicked, dropped, thrown (bad temper), and basically overly abused. When I remove my PSP to change out UMDs or remove sand from it I can't help but admire that fact that my PSP is still in mint condition, dispite all it has been through.

Bottem line: "A great case that can take a lot of abuse"

I bought this as a temporary fix to hold my PSP slim until cases specifically for the slim were made. Well, still haven't found one, so I kept this case.

Though made for the original PSP, the slim fits pretty well. The case screen doesn't *snap* shut, but the weight of the slim keeps it in place. MOST of the holes line up except for the headphone jack, which is completely covered by the case. This can be rectified by simply cutting out the small piece of the case that covers the headphone jack (a metal knife heated on a stove burner worked great!).

If you want a case to double as a stand, which was a must for me, then this case will work great for a slim; just make sure you make the necessary "adjustments" if you want to use headphones, like on a plane or something. It also holds 2 games and 2 sticks, so that plus what you hold in the PSP itself means you've got 3 disks and sticks to switch between.

Now that I've altered it a bit, this case is perfect; I have no need to look for slim-specific cases.

This case may look good, and sound good, but it is inherently flawed. Other reviews have stated that the screen cover is difficult to take off--they were not exaggerating. I'm just glad I tried it out before I put my PSP inside the case, because I would have damaged my PSP removing it. The only way I could release the screen involved jamming a screw driver into the latch. The case will not close properly if the screen cover is removed. Also, I found that, once I got the case to close properly, I could not open it up again without using excessive force. You would think that, since the case is made by Sony for the Sony PSP, it would be ideal...but this case is far, far more trouble than it is worth. Get a different case.

I bought this at the beginning when I bought my PSP, I expect something nicer, instead of a bulky plastic that will only care for the psp bottoms. The case is too bulky to hold it down, sides the grind wont hold down as shown in the pictures and when you add the 2 UMDs on the top, holy... it becomes a brick instead of a light gaming console. So my best advise is go for the Stealth version, its a bit lighter and is made of aluminium not plastics... it makes it better protection that this bulky plastic casing. Sides here you dont have enought access to all the ports of the PSP... so you have to take it out anyways.

I recommend not purchasing this item as a bundle with the new PSP Slim. Amazon should of pointed this out, that the New PSP Slim does not fit snuggly in the case. I have drop this case twice and the PSP will fall out.

I guess they(Amazon) expect people to buy it, then write a review about it. Instead of making Better quality insurance of the product, telling the consumer it "DOES NOT WORK WELL WITH THE NEW PSP SLIM".

The case does not come with instructions. The PSP locks in fast and securely - good luck getting it out though, which is an extreme pain in the @$$ when you want to swap out UMDs.
The reason I regret buying this is that in order to retrieve your PSP from its clutches, you must press inwards on the overlapping protective plastic "shield" at the same spot you press to open the case entirely. Then you have to - while pressing inward - lift the shield.
While this sounds easy and has been performed on other items, this case is more than just a little tough. It took 3 of us to figure out exactly where to push and how hard - which was a ridiculous amount.
Now keep in mind you are pushing inward towards your PSP while you are lifting the shield over the screen. If you are not careful and even if you go slow - this WILL SCRATCH THE SCREEN because you pushing a hard edge of plastic towards the surface of your PSP.
The whole point this item was now pretty much moot.

The fact that it flips opens to make a little stand so I can watch movies was tiny comfort when added in that the power input has a hard time getting to the port when the PSP is inside the case.

The grips on the case are well laid out and I feel confident holding them. The storage area for 2 UMDS is a good use of space.

A diagram would have been nice and possibly even prevented the scratch.

This case is not for the PSP Slim model. It is made for the original (larger) model so my Slim does not fit securely. I am able to make it work by using the screen cover as a "strap" to secure it. I basically jam the screen cover latch in between the case and the PSP.