| Brand Name: | Pyle Pro |
Product Details
Would you like to update product info or give feedback on images?
|
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
51 of 51 people found the following review helpful:
4.0 out of 5 stars
Not so bad!,
By
This review is from: PYLE PRO PT260A 200 Watt 2 Channel Home Stereo Receiver w/AM FM Tuner (Electronics)
I am writing this review in response to an earlier reviewer's comment about the hiss problem with this receiver.
I purchased this unit 6 months ago because I needed a receiver for under $700 that could handle a pair of 4ohm speakers. I was a bit skeptical about just how well this would work, but for less than $100 I believed it would be worth a shot. Initially, I encountered a similar difficulty with the hiss (as well as some clipping and distortion). However, as soon as I switched out the 4ohm speakers for an 8ohm Bose set, the receiver sang just fine. A keeper! (Note that some minor amp hum is to be expected with *any* receiver. The only time I can hear it on this model is when I place my ear directly in front of the speakers. That said, I have noticed over the years that some reviewers can be quick to growl at equipment when the real problem is poor speaker placement. There are several good articles on the web that provide details on how to avoid the audible consequences of positioning speakers too high or at incorrect angles.) That aside, here are a few other perks of the Pyle PT-260-A: - At level 10 (out of 40) it provides good background sound. At 20, it can fill a large room and be heard clearly in the next room. At 30, it becomes uncomfortable to the ears. - The EQ controls are programmed to handle a significant range, with the bass creeping as low as 40Hz (not always the case in cheaper model receivers, which usually only stretch to 60-80Hz). Meantime, the treble only reaches as far as 15kHz, which is actually a strength considering the depth of the bass (cheaper models tend to exaggerate the high end, which is why they tend to be characterized as sounding tinny). All that said, one slight twist of the EQ knobs can make quite a difference. Be sure to play around with different combinations until you land on just the right sound for your speakers and your setting. - The mic inputs work great for karaoke. Not my cup of tea, per se, but wonderful for children who want to sing along with a CD. (They also will have a lot of fun with the echo control!) And of course all equipment has quirks: - For my needs (with only one component connected), the PT-260-A serves its purpose quite well. However, if you intend to input more than one component, there is only one selector switch on the unit itself (though there is a separate button for CD, Aux, Tuner, etc. on the remote). In addition, the unit sets to Tuner each time it powers up (which then blasts the room with radio static if you don't have the antenna connected). - If you plan to use a turntable with this receiver, you will need to pick up a phono preamp (there is no powered input). - The display is a bit cheesy. The EQ meter simply dances a preset light pattern that has nothing to do with the music being pushed through. (Though it can be amusing to watch it bounce out of rhythm with the music!) So the verdict: This receiver costs less than $100. For a model that operates on par with more expensive models, it is worth learning to live with a couple of minor bugs. If you are on a budget, or have children who express an interest in listening to music, this is *the* way to go. If only a receiver of this quality had been available at this price when I was in high school! (In the early 1990s, the cheapest comparable model would have cost $250-350.)
9 of 10 people found the following review helpful:
5.0 out of 5 stars
Great Deal; Don't Hesitate,
By
Amazon Verified Purchase(What's this?)
This review is from: PYLE PRO PT260A 200 Watt 2 Channel Home Stereo Receiver w/AM FM Tuner (Electronics)
This is a great deal. I recommend it highly. The only drawbacks are that you don't get an input for a headphone jack (just 2 inputs for microphones). You get an input for CD/DVD and Auxillary and you can also play your IPOD/MPG3 on it, so everything goes. The AM antenna isn't so easy to hook up but the FM works great with your own antenna. Also on my particular unit, the input selector button doesn't always work but the remote does it anyway, so no big deal. Overall, great sound, 200 watts for great money. If they only had such a deal when I was younger and I could get away with blasting my stereo.
8 of 9 people found the following review helpful:
4.0 out of 5 stars
Great Home Audio/Theatre starter,
By Mike (Chesapeake, Va) - See all my reviews
Amazon Verified Purchase(What's this?)
This review is from: PYLE PRO PT260A 200 Watt 2 Channel Home Stereo Receiver w/AM FM Tuner (Electronics)
I bought this to put together a budget home stereo system, that I could also hook up things like my TV and CD/DVD player to.
Definitely a solid choice for an entry level system. Though it's not exactly clear in the product information, the rated 200w is total power, not per channel like other receivers are rated for. (You'll see on Amazon ones that say 300 watts (per channel) ). It has two channels, and two L/R speaker terminals for each channel. According to the product information, each channel can handle two 25 watt 8ohm speakers (50w x 2 channels), or a single 50w 8ohm on each channel. It was a little bit confusing, but that's coming from an amateur. I wouldn't recommend using 4 ohm speakers. One reviewer mentioned it would overheat, but also, in the manual, it does say normal impedance (for the device) is 8 ohms. The 200watt rating is a marketing trick I'm sure; 100watts per channel, x2 channels, @ 4 ohm. But it clearly says normal is 8 ohm. Maybe I misunderstand. Other reviews mention how hard it is to set the radio memory. It is actually not all the difficult (and no, it's nowhere in the product "manual"). Figured it out on accident. You have to first press menu twice, while in radio mode, and then you can use the main dial as the radio tuner (or use the tuner button on the remote). Once at the desired station, press memory, and then press channel up. You can hit channel down to verify your station was saved. Speaking of radio, I found it quite difficult to actually get stations in. Maybe I've got it setup wrong, but, at 93.7, I pick up background noise music from 103.7. And I can hear 93.7 from 95.5 all the way to 88.5, playing in the background. I've tried repositioning the antenna but it doesn't help. Something wrong with the tuner internally, I think. Does anyone else get this? Maybe it's because it's a saved channel, I don't know. Still odd and makes the radio almost useless. Which is okay, I can get radio through other devices and input. Someone mentioned the dancing bars don't line up to the music- it seems to work fine on mine. When you change the display (via remote or menu/big wheel) it goes through the cycle, I guess to show you what it is. But after it flows to the music. Overall very satisfied, does exactly what I need; deliver stereo sound. Minus one star for the radio tuner.
Share your thoughts with other customers: Create your own review
|
|
Tags Customers Associate with This Product(What's this?)Click on a tag to find related items, discussions, and people.
|
|
This product's forum
Active discussions in related forums
Search Customer Discussions
|
Related forums
|