| Part Number : | 11351 |
| Item Package Quantity: | 1 |
| Item Dimensions | |
| Length: | 10 inches |
| Width: | 8 inches |
| Height: | 5 inches |
What Other Items Do Customers Buy After Viewing This Item?
Product Specifications
Technical Details
- Made from FC25, fine grain cast iron; Trapezoidal-thread lead screw
- Less than 0.002" jaw deflection at 2,000 lbs. clamping pressure; Jaw surfaces square to 0.002"
- Solid iron construction with stress-relieved design; Replaceable jaw plates
- Pin stops every 15? for quick angle set-ups. Heavy steel cam locking mechanism for securing vise at any angle; Scale indexed in 1? increments from 0? to 90?
- Fixed jaw is grooved horizontally and vertically for holding round stock
Product Description
From the Manufacturer
4" Palmgren cradle style angle vise is the quickest way to set your work between 0? and 90?. Jaw Width: 4" Jaw Depth: 1-1/2" Jaw Opening: 4" Base Size: 7-3/8" x 7-9/16"
Product Description
Work Positioners & Levelers Type: Angle Jaw Depth: 1-1/2 Jaw Width: 4 Jaw Opening: 4
Product Details
Would you like to update product info or give feedback on images?
|
Customer Reviews
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
10 of 10 people found the following review helpful:
1.0 out of 5 stars
Palmgren #11351,
This review is from: Palmgren 11351 AVC35 Angle Vise, 3.5-Inch (4-Inch) (Tools & Home Improvement)
I purchased this item through Amazon to go with my milling machine and expected an American made product. Instead Palmgren has gone to China and I got an inferior Chinese manufactured vise with a stamped Palmgren nameplate. Vice was dirty and painted a sooty gray, not the American green as shown in picture. Machining and castings were not up to US standards. Two year warranty instead of lifetime for US manufactured vise. In short, disappointed. Amazon needs to properly represent what it sells.
7 of 7 people found the following review helpful:
4.0 out of 5 stars
nice little vice,
This review is from: Palmgren 11351 AVC35 Angle Vise, 3.5-Inch (4-Inch) (Tools & Home Improvement)
I ordered this vice to go with my Palmgren drill press. I found that it is a good little vice and pretty much as described in the add. The only problem is the chain that is attached to the pin geet in the way when sliding the vice around on the drill press. also the handle for clamping the angle of the vice can slip in to the groves that bolt down the vise which also gets in the way of sliding the vice around. If you are going to bolt the vise to the press this is a good vice to have.
Share your thoughts with other customers: Create your own review
|
|
Suggested Tags from Similar Products(What's this?)Be the first one to add a relevant tag (keyword that's strongly related to this product).
|
Customer Discussions
|
This product's forum
Active discussions in related forums
Search Customer Discussions
|
Related forums
|
