Customer Reviews

Park Tool Work Tray (For PCS-1, PCS-4, PCS-9, PCS-10, PCS-11, and PRS-15)

5 star:		(15)
4 star:		(9)
3 star:		(2)
2 star:		(1)
1 star:		(0)

 

 

SEE INSERTED PICTURE ABOVE. I like this tray, pretty sturdy, but I made one improvement. I added some rare earth magnets and collars one uses in woodworking to hold cabinet doors closed. Rockler dot com has some in varying sizes, just search rare earth magnets. Anyway, just use a wood screw to screw it to the tray, I used a washer under the collar since my screw was a tad too long. (poke a small hole in the tray where you want the magnet to go). Now you can keep those small parts handy without them getting lost.

The PCS-10 stand has the mounting collar needed to mount the tray, the PCS-9 does not, and I almost bought it; glad I got the PCS-10.

I didnt think this would be all that useful, but I got it as a gift along with my Park Tool stand. Much to my surprise, its super handy and along with a magnetic bowl makes keeping your crap in line easier than normal.

The work tray does a great job of keeping everything I need within easy reach... works great, however, check the Park website before ordering the required clamp and make sure it'll fit your stand.

Nice little add on to the work stand (I've got the PCS-10 - love it). Always good to have all the tools you need within close reach. The only thing that would make it better is if a small section of the tray was magnetic for screws/bolts, so you don't need to get a separate tray.

This tray is excellent keeping everything handy as you work or clean your bike. Be sure to buy the optional collar for your stand to lock the tray in place.

Any time my bike is on the stand (usually 3 - 4 times a week) the tray is attached and comes in very handy. If you're anything like me... then you are always putting things down and can't find them again. This tray solves this problem. All the tools I am using at the time stay in the tray so I can always find them.

Its also handy for holding your brushes when you are giving the bike a wash down.

Makes working on my bike much more enjoyable!! Now I can work on my bike and not lose my temper when I'm trying to loosen a bolt & hold my bike at the same time!!! I wish I would have bought one of these years ago!!!

I just installed it and found out that it needs a Park Tool Accessory Collar in order to mount to my PCS-1 (The PCS-4 also needs it). It would have been nice if the online description of the work tray had mentioned that, though it may have bumped the expense to more than I would have paid. A couple of hose clamps worked perfectly, if less elegantly.

The worktray seems just about right and should add some convenience when working on my bikes. The tray is deep enough to keep things from falling off with plenty of hangars and holes of various sizes.

Good tray. Even if you have the model stand that includes the 106AC bracket, the tray mounts too close to the lock lever, and gets in the way. You must order another 106AC to mount the tray where you need it -- away from the shaft lock.

This is a great addition to the stand. it allows you to have a place for all the bits and pieces, tools and lubricants, while working. It even has a place for a rag/towel. Be aware that it will require that you raise the jaws to allow the tray to stay in place, not a big issue.