Roofer's Choice Coil Nailer, 7/8" - 1 3/4", .102 Smooth Galvanized Nails, Carbide Tip Nose, Tested To 600,000 Cycles, Cycle Rate: 8 Per Second, 2 Finger Trigger, Bump Capability.
From the Manufacturer
The Paslode R175C Pneumatic Roofing Coil Nailer #501245 is used to apply asphalt roofing shingles to new or existing roofs. The shingle guide allows for accurate nail placement and the single-door magazine provides fast and easy loading. The Paslode R175C Pneumatic Roofing Coil Nailer is collated at a 15˚ degree angle and accepts all standard roofing coil nails both smooth and ring shank in 7/8" - 1 3/4" sizes. Features of the Paslode R175C Pneumatic Roofing Coil Nailer include the Extended Bumper Life, tested to over 600,000 cycles without failure, a Distinct Bumper Geometry, for consistent low pressure return during rapid fire and driving up to 12 fasteners per second and an improved Upper Piston Valve that virtually eliminates valve seizure even under adverse environmental conditions such as dust, high heat and humidity. The Paslode R175C Pneumatic Roofing Coil Nailer offers a Two Finger Trigger, providing Less Fatigue and more control. The Carbide tip nose, hardened driver and wear guards make the tool more durable, needing less maintenance. The Paslode R175C Pneumatic Roofing Coil Nailer also has an Adjustable Shingle Guide that keeps roofing shingles straight and properly aligned and the Tool-Less Adjustable Exhaust Cap allowing airflow to be easily redirected. Use the Paslode R175C Pneumatic Roofing Coil Nailer for: Roofing (New & Re-Roofing), Asphalt Shingles, Fiberglass Shingles, Roof Repair.