Your rating(Clear)Rate this item


There was a problem filtering reviews right now. Please try again later.

6 of 6 people found the following review helpful
on February 11, 2010
Verified Purchase
I saw the product, the company, I took a risk. This is one company that is worth that risk. Top notch. Product is high quality. Delivery was a few days from the order. Now my pellet stove silently drops pellets reliably. Fantastic experience.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
5 of 5 people found the following review helpful
on March 31, 2011
Verified Purchase
Based on another person's review of this motor, we purchased it. The reviewer had the same pellet stove as us (American Harvest from US Stove) and said that this motor worked well for him. We'd looked all over for an affordable replacement motor and couldn't find one. We'd purchased replacement motors from our stove manufacturer before, and they didn't last very long (and were $120). This motor is fabulous so far. We've had no troubles with it. It makes no noise that we can hear. It seems to be built at least as well as the expensive alternatives and is half the price! YAY!

As the other reviewer stated, it turns the wrong way for our stove, but it hasn't mattered because it only stirs the firepot; we're not using it as an auger motor. It comes with instructions on how to change the direction if you need to. And we also had to get a hole drilled in the shaft for the pin, which was no small thing. We tried a drill press--shaft was too hard. We had to take it to a machine shop where they used their toughest piece of equipment and were finally successful. Still worth it, though. Great motor!! Great price!!
11 commentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
7 of 8 people found the following review helpful
on October 10, 2013
Verified Purchase
I'm still really dumbfounded as to the price and quality of these motors. I have an England's Stove Works 25-PDV with the PU-047040 auger motors. These replacement motors work perfectly. I did have to reverse the direction of the motors, but that was really very simple to do.

Thank you for this great product!
11 commentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
4 of 4 people found the following review helpful
on October 16, 2010
Verified Purchase
i purchased two auger motors, one for myself the other for a friend. the price is fantastic , most places sell them for 120 dollars or more. was at my house in 3 days (cant beat that) made some purchases from this store before , great quality. i strongly recomend this store to any one that needs a motor
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
4 of 5 people found the following review helpful
on January 1, 2011
Verified Purchase
When I received the motor I was stunned. This particular motor is of a quality well above the original part it replaced. Heavy duty in all respects, cleanly cast and expertly assembled. The manufacturer claims the motor's direction of rotation is easily reversible and it really is(it's pretty much fool proof!). I installed the motor and it is almost silent compared to the constant "buzz" the original made prior to failure. btw...it's MADE IN AMERICA
22 commentsWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
2 of 2 people found the following review helpful
on October 23, 2010
Verified Purchase
This product is working very well on the pellet stove. When we bought it we didn't know it turned the wrong way, but after calling the 1800 number off the paper they informed us all we had to do was take the screws out and flip the motor. Works GREAT and was pretty cheap.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
1 of 1 people found the following review helpful
on March 2, 2014
Verified Purchase
I purchased this to replace the original motor on my Enviro Empress. It is ridiculously quieter than the manufacturer's motor. I continue to walk back to the stove to check that it is on because it is so quiet. I did not have to change the rotation direction and it simply fit.

A word of advice to folks is if you need to first test the motor you have, your Enviro Empress connects it via a simple set pin. Unscrew that a few turns and the motor will slide right out after you disconnect the two leads (plug on). Then use an old extension cord, with the female end cut off and the wires exposed to run power to the motor on or in a stable surface such as a vice. You will then be able to determine if the motor is actually good. If it is, then you likely have a different issue such as a loose bushing or a blocked auger.

It was harder getting my stove pipe off and back on then it was to deal with the motor.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
2 of 2 people found the following review helpful
on October 4, 2013
Verified Purchase
Worked good fit right in just had to switch the direction the auger witch the directions are with it to do it no problems
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
1 of 1 people found the following review helpful
on March 22, 2015
Verified Purchase
5 stars for price alone. Englander was $130.00 plus $12.00 shipping. this unit has wire leads that are ready to connect to your wires. either wires are the correct ones when you connect them. the wires will not change rotation. you must remove the 4 screws that mount the coil. then turn coil over and reinstall screws. took a couple of minutes to change rotation. motor seems to be as quiet cost for this was $51.27, a substantial savings. shipping was 2 days via usps and free. might purchase a standby at that price
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
3 of 4 people found the following review helpful
on February 11, 2011
Verified Purchase
After shopping around for the best price from the manufacturer to local stove shops, these guys had the best price. The quality seems to the same as the original piece. Buy two and have a back-up if you live in a really cold area.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse

Questions? Get fast answers from reviewers

Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
See all 68 answered questions


Send us feedback

How can we make Amazon Customer Reviews better for you?
Let us know here.

Your Recently Viewed Items and Featured Recommendations 
 

After viewing product detail pages, look here to find an easy way to navigate back to pages you are interested in.