Amazon.com Product Description
Whether you've lost one or more original remote controls or simply want to reduce the number of plastic wands floating about the living room, the Magnavox PM525 universal remote is ready to become the unified command center for your TV, VCR, DVD player, cable box, and satellite receiver. The device offers dedicated DVD- and satellite-specific functions (such as subtitle, repeat, and chapter scan, for DVD, and menu, guide access, page up/down/left/right, etc. for satellite) and advanced picture-in-picture controls, with toggling ability (picture swap) for use with compatible televisions.
The PM525 is equipped with a command-learning feature, which lets the remote learn commands from your original equipment remote control. Use the code-search button to set up the remote. You can either set up the remote using the code for your brand of product from the manual's handy code tables, or you can search through the library of codes until you find a code that works for your product.
You can store any kind of code under any mode, except for the TV mode--that is, you can store a VCR code under the CBL key, or a DVD code under the VCR key, etc. But you can only store TV codes under the TV key. A sleep timer can be set to turn the TV off up to a maximum of 99 minutes after it's programmed to do so.
The remote automatically times out if the buttons are depressed for longer than 30 seconds, conserving your battery power should your remote get stuck in a place where the buttons remain depressed, as between sofa cushions. The PM525 offers a glowing keypad for easy use in darkened home theaters, and it runs on 2 AAA batteries (not included). Codes are stored in permanent memory for 10 minutes while you're changing batteries so you won't lose any codes stored in the remote at those times.
What's in the Box
Remote control, user's manual.
Note: The remote operates the common features of most, but not all, models and brands of IR (infrared)-controlled video equipment. This remote may offer functions that are not available on your equipment, and your equipment may offer functions not covered by the remote. In such cases, use the original remote control for your equipment.
Product Description
Whether you've lost one or more original remote controls or simply want to reduce the number of plastic wands floating about the living room, the Magnoavox PM525 universal remote is ready to become the unified command center for your TV, VCR, DVD player, cable box and satellite receiver. This remote is equipped with a command-learning feature, which lets the remote learn commands from your original equipment remote control. Use the code-search button to se up the remote. The remote automatically times out if the buttons are depressed for longer than 30 seconds, conserving your battery power. The PM525 offers a glowing keypad for easy use in darkened home theaters, runs on 2 AAA batteries. Codes are stored in permanent memory for 10 minutes while you're changing batteries so you won't lose any codes stored in the remote at those times. A sleep timer can be set to turn the TV off up to a maximum of 99 minutes after it's programmed to do so.