Customer Reviews

Playseat Gearshift Holder Mount (Silver)

5 star:		(18)
4 star:		(14)
3 star:		(6)
2 star:		(1)
1 star:		(1)

 

 

It's a no brainer this is a required add-on if you have a detached gear box (G25 and G27). Nice consideration for both left and right hand side. Adjustments to front/back, inside/outside are adequate. I do wish there is adjustment for height though.

UPDATE: My kids (4 and 7 years old) like to sit in my playseat, and sometimes ON the gearbox! The thing hold up pretty well. For clarification, I have a G25 and the review is on installing G25 gearbox. I don't know how G27 setup is different, but it's definitely a must have...

If you have a Logitech G25 racing wheel and you are tired of having your gearshift box hanging around, you need this.

You can mount it left or right (comes with 2 mounts) and you can adjust it on both x&y axis (no height adjustment). It fits well for kids and adults using the same seat.

First, it's a rock solid attachment to the Playseats Evolution chair! Second, if you've got the Logitech G25, this is a must! The pictures from Logitech make it look like the shifter can be attached to the steering wheel, but it can not!

Installation is very simple but, do yourself a favor and buy this thing with the chair and install it while you're putting the chair together. It will save you from a two (different sized) bolt removal later!

The kit includes braces for both sides of the chair, let and right operations. I'd recommend to anyone to install both of them1 First is adds support for those players who want to move the shifter to the other side of the seat; but, the brace also adds additional support to the seat itself.

If you are mouting the shifter for the Logitech G25, the large center mounting pin assembly must be removed or else it won't fit on the mount. To do this, there are four (undocumented) screwes that have to be removed (2 long and 2 short) and the entire plastic thumbscrew assembly comes off and leaves you with a clean mounting shifter!

There are two thumbscrews included for adjustment and there are two include hex bolts to mount the shifter with.

Nice. Solid. A bit pricey. A must if you're a serious racer!

I bought this gearshift holder to attached my Logitech G27 shifter to my Playseat Evolution Gaming Seat. It came with all the requires parts and good instructions. It has a few adjustments that make finding the perfect fit/feel really easy. It comes with screws to mount the shifter directly to it, for a really secure fit. The only surprise was that you had to remove the mounting clamps from the shifter in order to fit it on the holder (not explained in the instructions), and required a long small screw driver which I luckily had.

If you own the Logitech G25 you really want this gearshift holder. It installs easily and is positioned very nicely. It's sold and adjusts easily. I wish I could slide back just a little more, but it's OK as it is. I definitely recommend it. BTW, it mounts either on the left or right side, so UK/Oz drivers will feel at home, too.

If you have a racing wheel without a gear shift, you don't need it obviously.

Item has very good quality. Installs easily. I wish it was adjustable as to height.

Perfect for Logitech G27, but I had to first figure out how to remove the plastic clamp support on the Logitech gear shift assembly before it would fit in the Playseat Gearshift holder. There are FOUR (4) screws on the Logitech gear shift assembly - two are immediately visible, the other two are recessed all the way down, but once I found them it was simple, and the mount is secure and works well.

I just bought the playseat and g27 steering wheel plus the gearshift holder . The playseat people should let customers know about the 4 screws you must remove before

you can fit the gearshift holder to the play seat. these items where made for each other you should not need to disassemble a part to fit the part. I got it all put together

and finished about 20 time trial laps when the welds broke on part b of the gearshift holder, the part that attaches to the playseat itself. Not good , now, i do not have time to try and get on the playseat web site which is not working. I'll just take the part to my race car shop and fix it my self. PS i have gran turismo prelude and the system all works perfect. Have orded gran turismo but it has not been released yet. can't wait. My real race car is a 1960 austin healey bugeyed sprite with a cosworth engine mazda 5 speed ford rear end and all new front end ie ties steering breaks . this little putt putt is fast. hope this helps .. i really like to practice during the winter months virtually that is

and this set-up is fantastic.

This is must have for the Logitech G25 racing wheel, which is what I got. Too bad that playseat didn't include this in their seats, but that's not much of big deal.

It's worked great for a few months and then just a few weeks ago, it broke, the welds broke right off. I think mine just had bad welds, You could tell that the welds are not very good at all.

But no problem there! Went out in the garage and welded it back to together! Now it's never going to fall apart again!

Does what is say's it does, although if you buy this at the same time as the playseat attach it before you build the seat! otherwise you're undoing what you've just done. Instructions are not very clear, but OK once you look at them and the items a while. Good it's got the option to be left or right hand drive.