Porter-Cable FC350 Clipped Head Framing Nailer Kit

by Porter-Cable

Product Description

From the Manufacturer

Porter-Cable FC350 Clipped Head Framing Nailer Kit

From the Manufacturer

Reload less often with a clipped-head framing nailer and reduce down time. The rugged aluminum magazine on this nailer has a capacity of 97 nails, compared to 72 for the round head framing nailer. This increases the time between reloads by 34-inch. It will fire paper-tape collated nails from .113-inch by 2-inch to .131-inch by 3-1/2-inch. The adjustable depth-of-drive allows setting the nail to the proper depth for the job. A barbed nose aids in toe nailing, preventing slippage so the nail is driven where intended. A rubber footpad is included to cover the barbed nose and prevent damage when nailing decking and sheathing. The exhaust port is muffled to reduce noise and is adjustable. A 3/8-inch quick coupler comes installed on the nailer, but a 1/4-inch quick coupler is also included for versatility. Includes framing nailer, carrying case, 1/4-inch male quick coupler plug with dust cap, oil, Allen wrenches, and operator's manual. NOTE: This nailer comes with a bump-fire trigger standard. A restrictive-fire trigger, which requires releasing the trigger between firings for more control, is available free-of-charge by calling 1-800-321-9443. Please provide the model number and serial number of each nailer requiring a trigger. For identification purposes, the bump-fire trigger is black and the restrictive-fire trigger is red.

FEATURES

• Uses standard 30° to 34° paper-type collated clipped-head stick nails from 2" to 3-1/2" x .113" to .131" dia.
• Rugged aluminum magazine holds two nail strips at a time
• Depth-of-drive adjustment to match application
• Serrated contact safety for easy toe nailing... also includes rubber nose for sheathing and decking
• Large air chamber for added power
• Ergonomic handle with rubber grip
• Muffled, adjustable exhaust port
• Standard Equipment: Nailer, 1/4" male quick plug with dirt & dust cover, carrying case, oil, allen wrenches, and operating manual

SPECIFICATIONS

• Fastener Type (Inches): Clipped Head 30° to 34°
• Shipping Weight (Lbs.): 17
• Fastener Range (In): 2 to 3-1/2 x .113 to .131
• Magazine Capacity: 97 Staples
• Jam Clearance: -
• Operating Pressure: 70-120 psi
• Firing Modes: Sequential & Bump Fire
• Height (Inches): 15
• Length (Inches): 19-1/2
• Weight (Lbs.): 8

WARRANTY
One-year warranty with 30-day performance certification.

Product Details

• Product Dimensions: 23.2 x 18.5 x 7 inches ; 7.5 pounds
• Shipping Weight: 18.6 pounds
• Shipping: This item is also available for shipping to select countries outside the U.S.
• ASIN: B00004SBBX
• California residents: Click here for Proposition 65 warning.
• Item model number: FC350
• Average Customer Review: 4.3 out of 5 stars  See all reviews (20 customer reviews)
• Amazon Best Sellers Rank: #615,351 in Home Improvement (See Top 100 in Home Improvement)
• Discontinued by manufacturer: Yes

Customer Reviews

Most Helpful Customer Reviews

28 of 30 people found the following review helpful:

4.0 out of 5 stars Get the restrictive trigger., July 16, 2000

By 

Doug Frederick (McKinney, TX United States) - See all my reviews

This review is from: Porter-Cable FC350 Clipped Head Framing Nailer Kit (Tools & Home Improvement)

Good gun, but be careful with it. Has a tendency to double fire with the regular trigger. Thought I was getting the hang of it, until I put a nail an inch and a half into the side of my hand. Got the restrictive trigger immediately after that and have not had any trouble since. I have several nailers and this is the only one that I have ever had a problem with double firing. Do yourself a favor and get the red trigger from the start. Only take a few seconds to change out.

9 of 9 people found the following review helpful:

4.0 out of 5 stars kevin, February 14, 2001

By A Customer

This review is from: Porter-Cable FC350 Clipped Head Framing Nailer Kit (Tools & Home Improvement)

great gun for the money...as for Raymond's problem finding nails for the clipped head portercable the home depot carries all sizes from 2 3/8 to 3 1/4 ring shanked ,plain shanked and galv....

12 of 13 people found the following review helpful:

4.0 out of 5 stars Porter-Cable FC350 Clipped Head Framing Nailer Kit, June 18, 2000

By A Customer

This review is from: Porter-Cable FC350 Clipped Head Framing Nailer Kit (Tools & Home Improvement)

I borrowed this nailer from a friend because I was building a work bench for the garage. It really kicked out the nails! They went through the 3/4" MDF and 2x4s like butter. It is a bit akward because of of it's size, but I did like the angled magazine which allows eaiser access to corners. I am looking to pick one up for myself soon, as I have a shelving project for the garage.