This Posi Lock 10554L long internal puller jaw is an accessory for use with the 105 and 107 manual pullers (sold separately), which remove shaft-fitted parts from housings or shafts where the fit is on the outer edge and reduce the force required to dismount the part. A long jaw increases the reach and spread when fitted onto the 105 or 107 pullers (sold separately). This puller is constructed of steel to help prevent rust and corrosion. A Posi Lock puller is suitable for extracting bearings, wheels, bushings, gears, and pulleys in applications in the automotive, agricultural, and manufacturing industries.
|Spread range||25.4 to 133.4mm|
Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts—the center bolt, gripping jaws, and T-handle—and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.
Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND and meets International Organization for Standardization (ISO) 9002:1994 standards.