Customer Reviews

Powerbuilt 648472 1/2-Inch Drive x 36mm Axle Nut Socket

5 star:		(5)
4 star:		(1)
3 star:		(0)
2 star:		(0)
1 star:		(0)

 

 

I used these to take off the axle nuts on my S2000. These nuts require 220 lb-ft to put on, and well over 300 to take off after many years.

This socket held up to those forces like a champ.

Probably could have rented a socket at the local auto parts store, but for such a good price (under $15) and for the 36mm axle nut on my 1997 Suzuki TL1000S, I will use it every time I adjust my chain!

It is very tough and will crack loose the 80 ft. lb. axle nut without stress.

36mm is also used on old VW rear axles and at over 250 ft. lb. would put this socket to the ultimate test...

This is a great product. An awesome price and seems to be decent quality. Takes the abuse and keeps going.

This was my cheapest option for a 36mm socket that seemed up to the job of cracking loose crankshaft nuts. It has done just fine at that.

Don't need it very often, but when you do, you must have it to get the axle nut off. Works like it should. Less cost than renting one.

It seems to be a quality product, it worked as it should. I had to use a 5 foot pipe on my breaker bar and it didn't break so I'd say it passed my test.