Customer Reviews

Powermatic 1660795K Model 66 10-Inch Left Tilt 5 Horsepower Cabinet Saw with 50-Inch Accu-Fence, 2 Cast Iron Extensions, Table Board, and Legs, 230-Volt 1 Phase

5 star:		(3)
4 star:		(0)
3 star:		(0)
2 star:		(0)
1 star:		(0)

 

 

This saw replaced a Delta 10" Cabnit Saw - which was a very good saw.

The Powermatic 5HP is one big saw. It will cut anything wood without burning. No matter how slow or fast I feed wood into it the powerful 5HP saw there are no problems. Plywood in sheets can be feed with ease. The cuts are straight the first time and require no secondary working. I have not had one poor plywood cut on this machine. This is the best ripping saw I have ever used. Again the cuts are true and I have not wasted any wood since the purchase of this unit. Wonderful work products can be produced with ease.

The sliding table was set up after viewing a video tape. Using the tips in the video I set up the sliding table - leveled and set it even with the blade in 3 hours. A recent review I read on sliding tables said it took six hours - anyone could do it alone in three following the video. If you have someone to help you - 2 to 2.5 hours. This is not a mobil unit - save your money - do not buy a mobil base. The sliding table must stay stationary to stay properly set.

The rail and fence fit the saw table and sliding table without the need for any cutting. The fence once aligned matains square. It adjusts with little effort. Repeat cuts are exact duplicates of one another. This is as good of fence as I have used and recommend it highly. There is no need of an upgrade here.

With the cast iron extention to the right of the blade and the wood extention table you have an unbeatable work service. Your work is fully supported. You can control cuts with little effort. You will be able to work plywood sheets all day long with this saw, it's sliding table to the left, and the 50 inch extention to the right.

The fit and finish are excellent. Everything went together with ease. The instructions were clear. I put on a Forrest blade and it was in perfect alignment without the need of adjustment - none! I could not believe that it was set right out of the box. The table was level and ground properly - my straight edge was dead flat over every surface of the table. The extension cast iron wing may be a bit off to the left outside but not that it effects cuts or quality of work. It is so close I just can not tell for sure.

This saw will not make better end results BUT it will allow you to work with confidence, building your skills. It is a high compacity workhorse. It will be the last cabnit saw I will buy.

I am happy with it every time I use it. It performs the way a table/cabinet saw should - it cuts everything perfectly, every time. It makes glue ready joints every time and I don't even use a fancy forrest blade. I use a decent 60 tooth Freud and I'm happy. It is amazing. The excalibure table is useful, though massive. It isn't the answer to all problems, but with some effort, you can make accurate & precise cuts on full sheets of plywood. I recommend an outfeed table in addition to all this saw has. It makes the sliding table more stable, and improves cuts. The 5 HP motor is great. It doesn't slow down under a load - ever, no matter what. You can rip through solid maple like it was balsa wood. The much touted cast iron top and trunion deserve the praise they receive. This saw is as solid as a tank. You could easily use it for 50 years and still be happy with the cuts!

Buy it and enjoy!

This is one big heavy saw. It took me three to four hours to set it up after watching the video on the sliding table, the table saw is machined perfect and is very powerful, the five horsepower motor will run though any hardwood you can cut. I have installed a Forrest Blade on it. With the sliding table I can cross cut a full sheet of plywood by myself.I build a lot of cabinets and I need a saw that will stay where you put it, this one will not move with a sheet of 3/4" plywood on it. The rip fence is strong and accurate. You want be disappointed with this saw, it is by far this best table saw on the market today.