Sell Back Your Copy
For a $0.44 Gift Card
Trade in
Have one to sell? Sell yours here
Pro/ENGINEER Wildfire for Designers Release 2.0
 
See larger image
 
Tell the Publisher!
I'd like to read this book on Kindle

Don't have a Kindle? Get your Kindle here, or download a FREE Kindle Reading App.

Pro/ENGINEER Wildfire for Designers Release 2.0 [Paperback]

Sham Tickoo (Author)
4.6 out of 5 stars  See all reviews (9 customer reviews)


Available from these sellers.



Book Description

August 2004
Pro/ENGINEER Wildfire for Designers Release 2.0 is a textbook written with the tutorial point of view with learn-by-doing as the theme. About 35 mechanical engineering industry examples are used as tutorials in this book and an additional 30 as exercises to ensure that the user can relate his knowledge of this book with the actual mechanical industry designs.

This textbook consists of 12 logically sequenced chapters covering the Sketch, Part, Assembly, Drawing, Format, and Report modes of Pro/ENGINEER Wildfire 2.0. Every chapter begins with a command section that provides detailed explanation of the commands and tools in Wildfire 2.0. The command section is followed by tutorials that are created using these commands. This approach allows the user to use this textbook initially as a learning tool and then later use it as a reference material.

The author provides free technical support to all users of this textbook. The users can contact techsupport@cadcim.com for any technical query they have.

The author provides the following teachings aids free to faculty using this textbook.

· Customizable PowerPoint Presentations for every chapter in this textbook. You can easily customize these PowerPoint Presentations based on the requirements of the course you are teaching.

· Instructor’s guide with solutions to all review questions and steps to complete all the exercises.

· Part, Assembly, and Drawing files of all tutorials, illustrations, and exercises used in this textbook.

· Course outline. The course outline clearly indicates which sections are to be taught in the introduction or basic class and which sections are for advanced class. This allows you to easily select the topics to be taught in your course.

· Student projects.

· Class tests that you can use as the "end of the course" tests.

Please contact the author at stickoo@calumet.purdue.edu or tickoo@cadcim.com to access all these teaching aids.


Editorial Reviews

About the Author

Sham Tickoo is a professor of Manufacturing Engineering Technology at Purdue University Calumet. He has been in the education and training since 1981 and joined Purdue University in the year 1987. Since then he has been teaching drafting and design, AutoCAD, AutoLISP, 3ds max, 3ds viz, Mechanical Desktop, Pro/Engineer, Autodesk Inventor, etc.

Prof. Tickoo is also one of the best known authors of CAD/CAM books in the world market. He has authored a number of books on the latest CAD/CAM technology. He is one of the very few authors in the world whose books are translated and sold in the countries like Italy, China, Philippines, and Russia.


Product Details

  • Paperback: 656 pages
  • Publisher: CADCIM Technologies (August 2004)
  • ISBN-10: 1932709037
  • ISBN-13: 978-1932709032
  • Product Dimensions: 9 x 7.4 x 1.5 inches
  • Shipping Weight: 2.4 pounds
  • Average Customer Review: 4.6 out of 5 stars  See all reviews (9 customer reviews)
  • Amazon Best Sellers Rank: #1,847,261 in Books (See Top 100 in Books)

 

Customer Reviews

9 Reviews
5 star:
 (7)
4 star:    (0)
3 star:
 (2)
2 star:    (0)
1 star:    (0)
 
 
 
 
 
Average Customer Review
4.6 out of 5 stars (9 customer reviews)
 
 
 
 
Share your thoughts with other customers:
Most Helpful Customer Reviews

23 of 26 people found the following review helpful:
5.0 out of 5 stars Could not find errors, November 3, 2004
This review is from: Pro/ENGINEER Wildfire for Designers Release 2.0 (Paperback)
Just wanted to state that the errors one of the reviewer mentioned in his review is incorrect. In this textbook, there is nothing like what he mentioned. May be the reviewer forgot to check the name of the book or the release...
Help other customers find the most helpful reviews 
Was this review helpful to you? Yes No


21 of 25 people found the following review helpful:
5.0 out of 5 stars Could not find any error..., November 6, 2004
This review is from: Pro/ENGINEER Wildfire for Designers Release 2.0 (Paperback)
B. Tupper made me recheck if I received the correct proe wildfire version 2 book from tickoo or not. Because in my book i did not find the error he has writen in his review. I think he tried to write for another book...

I am liking the tutorials in this book. Thanks to proe company also for making circular array easy in this version.
Help other customers find the most helpful reviews 
Was this review helpful to you? Yes No


7 of 7 people found the following review helpful:
3.0 out of 5 stars Good, but......, November 2, 2004
By 
B. Tupper (Ramona, CA United States) - See all my reviews
(REAL NAME)   
Amazon Verified Purchase(What's this?)
This review is from: Pro/ENGINEER Wildfire for Designers Release 2.0 (Paperback)
Original review, 2 November 2004

Revised 25 January 2005

Turns out my original review was referenced to the wrong edition, and with that I accept the objections which Raks and Nick raised. The problem goes back to Amazon.com, who sent me the wrong book.

That said, much of my original review still holds, though I am raising my evaluation from three to four stars.

This book has much to recommend it--especially for beginners in a classroom situation. However, it has too many errors and omissions to be fully satisfactory for unassisted use by the beginners it targets.

This is a tutorial, not a reference work. That is, going page by page from the beginning to the end, one gets reasonably complete coverage of the main features of Wildfire. However, many features and operations are omitted from discussion or covered only superficially. This would not be a problem in a classroom situation, or if there were an experienced Pro/E user close by to answer questions. But a student working on his own will often be left floundering. It helps if one has recourse to the Pro/E Help Center, though that is unnecessarily difficult to find answers from.

Given the nature of Pro/E and the editorial style of the book, it is not practical to use an edition of the book which is not specific to the particular release of Pro/E. Among other things, PTC Corp is in the process of converting the Menu Manager with its submenus to dialog boxes, so that a student may be misdirected unless matching editions are used.

This edition appears to have fewer errors than the previous one. Still, Mr. Tickoo needs to submit his manuscripts for editing, both of grammar/punctuation and of technical directions, by persons competent in English and in the programs. The language errors are aggravating but do not diminish the technical value of the book. The technical errors and omissions are more serious. The instructions are often incomplete or incorrect to the extent that the indicated operations cannot be completed based on the information given. For example, on page 4-14, Figure 4-24, the student is instructed to select the Edge. That doesn't work. The correct instruction is the corner--the "Vertex." The discussion of the Datum System, perhaps the most difficult and most critical aspect for a working knowledge of Wildfire, is skimpy at best. The examples and instructions given in the text only equip the student to stumble around looking for workable solutions.

The tutorials are for the most part explicit and complete, though sometimes excessively redundant on common features and short on instructions for new or uncommon features. The Exercises, at the end of the chapters after the Tutorials and Review Questions, often rely on operations which are not discussed until a later chapter.

Neverthless, all things considered, I would judge this book as a qualified success--excellent for classroom use or under the tutelage of an experienced user, OK for a resourceful independent beginner willing to poke around for solutions when things don't work as expected.

It should be noted that Mr. Tickoo has provided extensive material on his website supplementing this book. However, those materials work only for the Student/Tryout version of Wildfire, not for the commercial release. A person using the commercial release should obtain a tryout version (free for two months) if he wants take advantage of Mr. Tickoo's supplementary materials.
Help other customers find the most helpful reviews 
Was this review helpful to you? Yes No

Share your thoughts with other customers: Create your own review
 
 
 
Most Recent Customer Reviews







Only search this product's reviews



What Other Items Do Customers Buy After Viewing This Item?


Tag this product

 (What's this?)
Think of a tag as a keyword or label you consider is strongly related to this product.
Tags will help all customers organize and find favorite items.
Your tags: Add your first tag
 

Sell a Digital Version of This Book in the Kindle Store

If you are a publisher or author and hold the digital rights to a book, you can sell a digital version of it in our Kindle Store. Learn more

Customer Discussions

This product's forum
Discussion Replies Latest Post
No discussions yet

Ask questions, Share opinions, Gain insight
Start a new discussion
Topic:
First post:
Prompts for sign-in
 


Active discussions in related forums
Search Customer Discussions
Search all Amazon discussions
   
Related forums


Listmania!


Create a Listmania! list

So You'd Like to...


Create a guide


Look for Similar Items by Category