This is the ProTek R/C P-8 1/8 Scale Buggy Super Hauler Bag. The P-8 Super Hauler Bag has evolved, and now features a variety of improvements that make the P-8 a durable, high quality, easier to use piece of luggage. These improvements include plastic interior framing and additional Velcro surfaces that secure the shelves on the sides and rear, to prevent the shelves from sagging and causing the drawers to hang up when they are being pulled out or slid into position. Protective zipper tabs have been added to the front cover to help protect the zippers during transportation, and a solid Velcro strip has been added to the entire length of the lower portion of the front cover to help keep the cover secured. When the cover is rolled up there are now five Velcro tabs (instead of three), that will help to prevent the cover from coming loose when its rolled up. Finally, the graphic on the front features the ProTek R/C checkered flag graphic, with a ProTek R/C logo on the rear flap. The ProTek R/C P-8 super hauler bag was designed from the ground up for 1/8th scale buggy racers. The bag has space on top under a covered flap for storing all your tools, a place on the back for your setup board and storage compartments on the side for storing your setup equipment or other tools. Inside the bag has three layers of drawers, with four split draws on the bottom (two each side by side above each other) and one large drawer on the top. These are the newer style Hauler Bags that have plastic inner boxes. The large drawer on the top is large enough to hold a 1/8th scale buggy with wing and wheels attached! In addition, it is also very easy to tow the bag around the track as it features a heavy duty retractable handle and smooth trolley wheels. Also included is a carrying strap that can be moved out of the way to access tools in the top compartment, or adjusted to provide easy carrying of the bag.