Customer Reviews

Progressive International Set of 2 Ice Sticks Flexible Ice Trays

5 star:		(13)
4 star:		(11)
3 star:		(3)
2 star:		(7)
1 star:		(5)

 

 

Finally an easier way to get ice into your Sigg Bottle!!! We have tried cheaper trays and none of them fit into the Sigg bottle opening and some of them were too flimsy! As a mom of two boys (three if you count my husband :-) it took too long to try to fill all of our Sigg bottles with crushed ice (we had to do crushed since the cubes from the fridge were impossible). The crushed ice would go all over the place! What a mess!!!! This is a wonderful solution for getting ice into all of your Sigg bottles!

Sigg got this right - easy to fill, comes out easily and fits! You will love this product!

The skinny shaped ice keeps your beverage cold all day if you have an isulated cuzie over your canteen. If you put your tray in the freezer and then pour the water in tray with a cup while it's in the freezer, you won't end up with water all over trying to transport water filled tray into the freezer.

While this tray makes the perfect sized ice cubes for our water bottles and the ice comes out of the tray easily, it is almost impossible to get the tray from the faucet to the freezer and into the freezer without spilling half of the water. The flexible tray almost need to be sitting in a second rigid tray.

The trays are too floppy to put in your freezer alone. I tried them with water and they make pretty cool ice cubes but I had to place them on a cookie sheet and then in the freezer. Even then the water poured out a bit onto the sheet. I will have to clear off an entire shelf so I do not have to try balancing them.

My intended use is to freeze breast milk in them and then place them in a ziplock bag for long term storage. This will eliminate the need for expensive bags and the square design will allow them to take up less space in my freezer and I can place them in a bottle pretty easily. I see the problem with trying to place several in the same bottle... still should be better and less expensive than the alternative.

I will likely purchase at least one more set so I can have a good production line going since the cubes are approximately 3/4"x3/4"x4" and each is probably about 1 oz. It took approximately 1 hour for the cubes to freeze in my freezer.

We purchased 2 sets of these to replace the smaller silicone ice tube trays sold here at Amazon a couple years ago, they are not listed here anymore. We wanted replacements because the first ones were quite small and wiggly and spilled alot carrying them to the freezer. These Progressive Int'l trays looked to be just the ticket. Our fault was believing that when we typed in the search for silicone ice tube trays we would see only silicone ice tube trays. These came up in the search and looked great, got them, unpacked them, noticed a bad plastic-y rubber-y odor; our original small ones had no odor. I washed them several times but could not eliminate the odor, not just unpleasant odor but it seemed to be getting more and more foul the more I washed them. So I am on Amazon looking for the old smaller type trays and they can not be found, so I decide to write a review for these. I read through the ad again and to my surprise and shame-on-me, these are not silicone! The ad only refers to them as flexible ice tube trays and plastic and rubber are both flexible, but plastic and rubber or latex words are not in the description anywhere either so I do not know the true materials that theses are made from. When the foul taste of the ice cubes came out of the foul smelling trays I pitched them to the trash. The ice cubes themselves tasted bad and once they started melting in our water bottles the water began to taste tainted. Too bad because these tray are bigger and sturdier and make bigger ice tubes that will still fit into Sigg and Klean Kanteen bottles. I can not find any that say 100% silicone ice tube trays to fit in water bottles! Where to look now? Amazon always has everything we are looking for. No luck today though but will keep coning back to check.

I called the company, and these are made of Thermo Plastic Elastic, not silicone. Of course food-grade and safe per FDA. Not for my kid!!!

While this is a brilliant idea for large-mouth metal bottles, the ice forms shapes too wide to fit in basic grocery-store bought water bottles.

The flexible ice trays offered by Progressive International are not bad at all. What we have here is a set of 2 trays made of flexible silicone/rubber. This set contains both pros and cons about owning, however in the end it is a worth while investment.

They trays you get are made of a very flexible silicone/rubber material. It does not have a chemical smell to it, and produces 8 molds a piece (16 sticks in total).

PROS
- set of 2 for a total of 16 sticks.
- flexible material makes for extremely easy removal of the ice sticks(Can easily remove the sticks individually)
- sticks are thick enough to last a while in a bottle of water
- material is durable, thus will last a long time + will not crack after constant use
- MACHINE WASHABLE (top row)

CONS
- Trays are too flexible you could say. Filling them up and transporting to freezer is a recipe for disaster (**A simple solution to this problem is listed below**)
- First few batches of sticks had a "strange taste" about them... a faint taste of plastic. This was even after washing them before use. *Plastic taste was gone by the 3rd use of the tray and has not returned


OVERALL
For the price you get two high quality flexible ice stick trays. The sticks fit perfectly for a large variety of water bottles, and they last for a decent amount in a drink. The plastic after taste was very faint and quickly went away after a few uses. To be safe I would probably discard the initial batch you make with each tray(Better to be safe than sorry). Other than the initial after taste and above average difficulty in moving the tray(once filled with water), the trays perform as advertised. I would give the product 4 stars.


**NOTE: For an easier time making the ice sticks, rather than fill the tray up at the sink and move it to the freeze, bring the water to the freezer!
- Place Ice tray where you want it in the freezer.
- Get a squeeze bottle(like a condiment bottle for ketchup) or simply a cup of water. Just fill the tray up while it rests in the freezer.

This way you avoid having to carry the tray(s) to the freezer and risk the flexible tray from wobbling all over the place.

After ordering a Hydro Flask (which I am very satisfied with), I wanted to get an ice cube tray that would make ice cubes that would fit, Considering my bad experiences with traditional trays (cracking, aftertaste, or both.) I decided that I would give a silicone set a try.

They're going back. They have two glaring issues:

1) They are not thick enough. They could be made slightly thicker (to the point where water won't cause them to buckle and spill water everywhere unless you half fill it) or have some sort of tray to go underneath. This comes with neither.

2) After washing multiple times, a bad taste persisted. I washed other ice cube trays (traditional) and they made ice without taste fine. To confirm I wasn't nuts, I had three friends try the ice and all three noticed the bad taste.

I'd tolerate the first, but the second is unacceptable to me. As such, I'm returning them. I will probably end up ordering the official ice tray directly from Hydro Flask instead.

I have several Sigg bottles and these make perfect ice "cubes" for them. Also, easy to pop ice out with your fingers from below due to the flexible silicon. No need to twist the tray snapping the ice loose all over the freakin' place.