|
Frequently Bought Together
What Other Items Do Customers Buy After Viewing This Item?
Product Specifications
Part Number 2005 RAD Bike Hoist
Item Package Quantity1
Item Dimensions
Length12 inches
Width6 inches
Height9 inches
Product Features
|
Product Description
Amazon.com Product Description
Reclaim your garage! Featuring thick ropes for durability, the RAD Easy Bike Hoist lets you store your bike overhead, so it won't clutter up your home, garage, or storage space. This ceiling-mounted bike hoist is designed for ceilings up to 12 feet. It keeps your bike safely up and out of the way, and it also makes your bike easy to access when you're ready for your next ride. Built to perform flawlessly, the RAD Easy Bike Hoist is backed by a lifetime limited warranty.
Lifts Easily to Save Space
With the RAD Easy Bike Hoist, you'll have a place for your bike and access to all the space you've been missing in your garage or storage space. Smooth pulleys and latches make it easy to lift your bike up to the ceiling, while an innovative rope-locking mechanism keeps your bike safe and secure from unwanted release.
|
 An advanced rope-locking mechanism prevents unwanted release. View larger. |
 Adjustable hooks let you hoist bikes and other items off the floor and out of your way. |
With the RAD Easy Bike Hoist, you'll have a place for your bike and access to all the space you've been missing in your garage or storage space. Smooth pulleys and latches make it easy to lift your bike up to the ceiling, while an innovative rope-locking mechanism keeps your bike safe and secure from unwanted release.
Robust Engineering for Durability
The RAD Easy Bike Hoist can hold the heftiest bicycles. With a load limit of up to 100 pounds, this mounting system features robust engineering for smooth lifting that doesn't put excessive strain on your hands or back. The thick rope will resist fraying, keep your bike steady and secure, and last a lifetime. The rubber-coated hooks will prevent scratching, and the advanced braking system will provide peace of mind--you'll know that once your bike is hoisted and locked, it will stay secure.
Easy Installation and Operation
Installing the RAD Easy Bike Hoist is fast and easy. You can mount the hoist on a two-by-four and screw the two-by-four to a joist, or you can mount the hoist directly to the joist itself.
And using the hoist is just as simple--attach the clamps to the handlebars and seat, and you're ready to comfortably lift your bike up to the ceiling. Once the locking mechanism clicks in, wrap the rope around the included wall mount to keep your bicycle secure. When it's time to get your bike down, simply unlock the mechanism and use the rope to smoothly bring it to the ground.
The RAD Easy Bike Hoist is backed by a lifetime limited warranty.
What's in the Box
Two hoist brackets with integral pulley system, two rubber-coated hoist hooks with pulley, one wall-mounting cleat, one nylon rope, ten mounting screws, and instruction manual.
 Rubber-coated hooks attach to the seat and handlebars without creating scratches. |
Product Description
There's no such thing as not enough room for another bike. Store your bikes overhead and out of the way. Smooth pulleys and latches make lifting even heavy bikes super easy. The exclusive rope locking mechanism prevents unwanted release and can suspend one bike - 55 lb. load limit. Please note, you can mount this item as pictured on a 2 x 4 and screw the 2 X 4 to the joist or mount it right to the joist itself. The hoist is built with thick rope for a better look and feel. Lifetime warranty.
Product Details
Would you like to update product info or give feedback on images?
|
Customer Reviews
Most Helpful Customer Reviews
416 of 418 people found the following review helpful
Amazon Verified Purchase
We researched a lot of similar products via online reviews, settling on this one as having the greatest likelihood of highest quality / best price and WE ARE VERY PLEASED.
Here are some key things we'd like you to know:
1. It takes some time to get these things mounted right, so just plan on it... you need to string the rope through the 4 pieces and pulleys just so, mount them on joists just so, and ensure the distance between the two pieces is just right for your bike. We recommend at least two people, chips and salsa, and perhaps a coors light ;)
2. You can mount several bikes fairly close together if you offset the handlebars a bit forward and back among the mounts so that the handlebars never "share the same space." We bought 5 of these bike hoists and mounted them to run parallel to the joists spaced at 24" for mounting 5 bikes, one bike on each of five different joists mounted side-by-side. We bought long screws from the hardware store to replace those included in the package so we could securely screw through the drywall and further into the wood joists. We'd recommend including this hardware store errand in your time estimates for installation.
3. It is important that the BACK tire go toward the wall where the rope coming out of the brake will be cleated. The whole rope and braking mechanism works so well this way ... if you put the handlebars on the wall side like the picture for this product, then the handlebars block you moving the rope to operate the brake (trust, trust, trust me on this). If you put the back tire to the wall, the rope moves freely :) By the way, the braking mechanism in the pulley seems so sturdy you might choose not to mount/use the cleat, but it does feel safer to us to use it.
4. The distance between the ceiling and the bike will not be related to how far up the handlebars or the seat stick up ... it will be the length of the hardware above where it hooks on -- this may be important to you if you are mounting above a car and top-to-bottom distance matters. We mounted three of our bikes above a mini-van roof (the other two in front) and it was important to choose the lower profile bikes as not all of the bikes would have fit directly above the van. The "first bike" in line (at the front of the van) can be raised and lowered while the van is parked in the garage so that's a great location for whichever bike you'll be riding most frequently *or* for the bike of a kid not old enough to move the car in order to get his/her own bike down ;)
5. On arrival, the instructions said the mounts would hold 100 pounds (which is more than we had read here online). Our tandem bike fully equipped is just under 50 pounds and seems very secure and happy.
6. These are designed for the top rounded section of the lower hook assembly to fit into the rounded-out section of the ceiling mounted pulleys. The hook assembly will only fit into the ceiling assembly if the two pieces mounted on the ceiling are spaced EXACTLY to fit the specific bike where the hooks will grab the seat and handlebars. You'll be much more pleased if you take the time to get this spacing right (you can tell by letting the hooks hang down while you are choosing the mounting position ~ gravity will allow the ropes to work as a plumb line :)
7. Our thoughts relative to the complaints you might read about this product ... A. The rope has been fine, no fraying or other problems. B. The "hook" ends could be hook-ier without a doubt, although we've not encountered any problems with them (perhaps because we don't live in earthquake zones and we don't move with great haste :) C. Sometimes the front or back of the bike will raise or lower faster than the other end -- when this happens we simply grab the lowest tire and give it a boost up to level it which happens quickly and then it stays level for the rest of the up or down operation so it's never been a big concern. D. We mounted each bike directly into one joist (i.e., parallel/directly below one joist and not perpendicular between two joists) thus there was no need / benefit of mounting the brackets to a 2x4 first and then mounting the 2x4 to the ceiling -- we just mounted straight into the ceiling.
8. If you are going to cut the rope shorter, only do so when the bike is in the down position ... once the bike is lowered, this cool contraption uses a lot of rope!
9. Everyone in the family can operate these hoists easily -- they are so much safer and usable than the stationary hooks we used to have that involved lifting heavy bikes on and off. Also, if you leave the kickstand down as you put your bike up, then when you lower the bike on the pulley later, it will land ready to go :)
10. An unexpected benefit (beyond the extra garage space which we were hoping for) has been that all of us ride our bikes much more often than we used to. Putting the bikes up and getting them down is so easy that it has brought back a lot of frequency and joy to our bike riding experience.
November 2011 Update ~ Still using them and still loving them :)
Bon Appetit!
Here are some key things we'd like you to know:
1. It takes some time to get these things mounted right, so just plan on it... you need to string the rope through the 4 pieces and pulleys just so, mount them on joists just so, and ensure the distance between the two pieces is just right for your bike. We recommend at least two people, chips and salsa, and perhaps a coors light ;)
2. You can mount several bikes fairly close together if you offset the handlebars a bit forward and back among the mounts so that the handlebars never "share the same space." We bought 5 of these bike hoists and mounted them to run parallel to the joists spaced at 24" for mounting 5 bikes, one bike on each of five different joists mounted side-by-side. We bought long screws from the hardware store to replace those included in the package so we could securely screw through the drywall and further into the wood joists. We'd recommend including this hardware store errand in your time estimates for installation.
3. It is important that the BACK tire go toward the wall where the rope coming out of the brake will be cleated. The whole rope and braking mechanism works so well this way ... if you put the handlebars on the wall side like the picture for this product, then the handlebars block you moving the rope to operate the brake (trust, trust, trust me on this). If you put the back tire to the wall, the rope moves freely :) By the way, the braking mechanism in the pulley seems so sturdy you might choose not to mount/use the cleat, but it does feel safer to us to use it.
4. The distance between the ceiling and the bike will not be related to how far up the handlebars or the seat stick up ... it will be the length of the hardware above where it hooks on -- this may be important to you if you are mounting above a car and top-to-bottom distance matters. We mounted three of our bikes above a mini-van roof (the other two in front) and it was important to choose the lower profile bikes as not all of the bikes would have fit directly above the van. The "first bike" in line (at the front of the van) can be raised and lowered while the van is parked in the garage so that's a great location for whichever bike you'll be riding most frequently *or* for the bike of a kid not old enough to move the car in order to get his/her own bike down ;)
5. On arrival, the instructions said the mounts would hold 100 pounds (which is more than we had read here online). Our tandem bike fully equipped is just under 50 pounds and seems very secure and happy.
6. These are designed for the top rounded section of the lower hook assembly to fit into the rounded-out section of the ceiling mounted pulleys. The hook assembly will only fit into the ceiling assembly if the two pieces mounted on the ceiling are spaced EXACTLY to fit the specific bike where the hooks will grab the seat and handlebars. You'll be much more pleased if you take the time to get this spacing right (you can tell by letting the hooks hang down while you are choosing the mounting position ~ gravity will allow the ropes to work as a plumb line :)
7. Our thoughts relative to the complaints you might read about this product ... A. The rope has been fine, no fraying or other problems. B. The "hook" ends could be hook-ier without a doubt, although we've not encountered any problems with them (perhaps because we don't live in earthquake zones and we don't move with great haste :) C. Sometimes the front or back of the bike will raise or lower faster than the other end -- when this happens we simply grab the lowest tire and give it a boost up to level it which happens quickly and then it stays level for the rest of the up or down operation so it's never been a big concern. D. We mounted each bike directly into one joist (i.e., parallel/directly below one joist and not perpendicular between two joists) thus there was no need / benefit of mounting the brackets to a 2x4 first and then mounting the 2x4 to the ceiling -- we just mounted straight into the ceiling.
8. If you are going to cut the rope shorter, only do so when the bike is in the down position ... once the bike is lowered, this cool contraption uses a lot of rope!
9. Everyone in the family can operate these hoists easily -- they are so much safer and usable than the stationary hooks we used to have that involved lifting heavy bikes on and off. Also, if you leave the kickstand down as you put your bike up, then when you lower the bike on the pulley later, it will land ready to go :)
10. An unexpected benefit (beyond the extra garage space which we were hoping for) has been that all of us ride our bikes much more often than we used to. Putting the bikes up and getting them down is so easy that it has brought back a lot of frequency and joy to our bike riding experience.
November 2011 Update ~ Still using them and still loving them :)
Bon Appetit!
102 of 106 people found the following review helpful
Amazon Verified Purchase
This bike lift is almost identical to the more expensive Racor list. We purchased a Racor first, then three of these. The only difference is slightly cheaper rope, and different pulleys. For the price, I'm happy that I went with this one.
Review from my Racor purchase (applies to all of them):
We purchased four lifts (three of this brand, one Racor) for our garage and are happy with them. We were able to position each bike about 16" apart and have no trouble getting any bike up or down.
I have several hints from our installation, and one complaints, but on the whole am very satisfied:
Positive:
* Works smoothly
* Clever, simple system
* Locking mechanism for rope is nice
* Installation is straightforward
Negative:
* Hooks need a safety strap, depending on where you attach them
Hints:
* I attached the hooks to a lower location on each bike to have the bike lifted all the way to the ceiling. This gives me enough room to stand beneath the bikes without bending my head.
* I used some of the extra rope, after cutting to an appropriate length, for safety straps for the hooks. Depending on where the hooks attach, they may not have enough bite to fully trust -- easy way to prevent potential injury (see an earlier post on earthquakes!!)
* I don't recommend using the supplied bracket for excess rope. I just coiled the rope and hung it from one of the quick-release levers on the bike. Works great, and keeps the ropes from getting tangled.
On the whole, I'm happy with our purchase. Almost identical to the Racor lift here Racor Ceiling Mounted Bike Lift #PBH-1R and a significant savings that adds up if you're buying several.
================================
UPDATE: January 20, 2010
================================
After living with these hoists for a while, I have mixed emotions:
* Hooks do not have a deep/aggressive enough curve, resulting in a less than optimal hold depending on what part of the bike you're trying to hold.
* Some sort of safety strap is necessary on each hook, partly due to the shape of the hook.. I dropped a bike several times due to the hook not holding reliably, a strap would have at least made this less painful.
* While the hoist makes the bikes easier to raise and lower (minus the hook issues), it is not able to get the bikes as high as simple bike hooks mounted in the same location
Given the lack of trust in the hold provided by the hooks plus the few inches of lost clearance that make a difference in our garage (though our mounting situation may be lower than yours) I've gone back to good old bike hooks to store our bikes.
Review from my Racor purchase (applies to all of them):
We purchased four lifts (three of this brand, one Racor) for our garage and are happy with them. We were able to position each bike about 16" apart and have no trouble getting any bike up or down.
I have several hints from our installation, and one complaints, but on the whole am very satisfied:
Positive:
* Works smoothly
* Clever, simple system
* Locking mechanism for rope is nice
* Installation is straightforward
Negative:
* Hooks need a safety strap, depending on where you attach them
Hints:
* I attached the hooks to a lower location on each bike to have the bike lifted all the way to the ceiling. This gives me enough room to stand beneath the bikes without bending my head.
* I used some of the extra rope, after cutting to an appropriate length, for safety straps for the hooks. Depending on where the hooks attach, they may not have enough bite to fully trust -- easy way to prevent potential injury (see an earlier post on earthquakes!!)
* I don't recommend using the supplied bracket for excess rope. I just coiled the rope and hung it from one of the quick-release levers on the bike. Works great, and keeps the ropes from getting tangled.
On the whole, I'm happy with our purchase. Almost identical to the Racor lift here Racor Ceiling Mounted Bike Lift #PBH-1R and a significant savings that adds up if you're buying several.
================================
UPDATE: January 20, 2010
================================
After living with these hoists for a while, I have mixed emotions:
* Hooks do not have a deep/aggressive enough curve, resulting in a less than optimal hold depending on what part of the bike you're trying to hold.
* Some sort of safety strap is necessary on each hook, partly due to the shape of the hook.. I dropped a bike several times due to the hook not holding reliably, a strap would have at least made this less painful.
* While the hoist makes the bikes easier to raise and lower (minus the hook issues), it is not able to get the bikes as high as simple bike hooks mounted in the same location
Given the lack of trust in the hold provided by the hooks plus the few inches of lost clearance that make a difference in our garage (though our mounting situation may be lower than yours) I've gone back to good old bike hooks to store our bikes.
62 of 63 people found the following review helpful
Amazon Verified Purchase
I am actually using the product to hoist something other (much heavier) than a bicycle but I think my comments might still be of interest to others. I found the product to be reasonably well made. The rope, as noted by others, is inexpensive but suitable for its purpose. If you don't like it, you can certainly afford to replace it based on the product's low price. The only complaint I have is that the two pulleys don't rise at the same rate; the pulley carrying the least amount of weight will rise first and once at its maximum height, will then allow the pulley with the heavier load to rise. This probably isn't an issue for hoisting a bike but in my application, I need both pulleys to rise equally at the same time. It's an easy problem to work around but the product would be perfect without it. To be honest, I'm not sure what could be done about this as I think it's just the physics of its two-pulley design. For $12.00 each and free shipping though, I'm more than satisfied (and I purchased 4). For those hoisting bikes, it certainly beats lifting your bike in the air to hang it on a hook and, by storing the bike horizontally, you have more space underneath it than if you had to hang the bike vertically from a single hook. As for mounting, as others have suggested, I would recommend first mounting the entire hoist on a 5 or 6 foot long 1x4 and then mounting the 1x4 to your ceiling. Without the 1x4, trying to align the hoist's mounting holes with your ceiling joists is all but impossible if you're mounting the device parallel to your joists. Even when mounting the hoist perpendicular to your joists, the hoist's mounting points need to be as vertical to the bike's attachment points as possible to ensure maximum security when lifting the bike; something your joist spacing may not allow. Pre-mounting the hoist to the 1x4 eliminates nearly all of these concerns. Other than that, I highly recommend the product; it certainly beats paying $60.00 for the glorified hook of a competing product.
Most Recent Customer Reviews
Good idea, but...about those hooks
I bought and used this for storing our tandem bicycle. Everything worked well except the hooks. They aren't very hefty and tended to bend with the weight of the tandem to the... Read more
Published 3 days ago by Neal
Works but needs tweaking
I bought the 2 pack to raise our Mtn Bikes when not in use. Thankfully I read several reviews to make me aware of the limitations of this inexpensive lift. Read more
Published 4 days ago by Michael Handlin
Best for infrequent use
This bike hoist isn't bad for the price, but I only use it to keep a spare bike out of the way. As others have noted, use your own screws and make sure you attach the hoist to... Read more
Published 1 month ago by AR
Good but not great!
For the money, these things are a steal! My only problem is that they were a little harder to install then I thought they would be. Read more
Published 1 month ago by Mike Joe
overhead bike rack hoist
nice product, hooks could have a little more angle to them and directions could be a little clearer on exactly where to measure the hooks themselves, the rope could be a little... Read more
Published 1 month ago by Frank L. Adamec
Bike Hoist System
This RAD Cycle Ceiling Mount Bike Hoist was easy to install. Directions were easy to follow. Tools used were simple enough to be found in most homes. Read more
Published 1 month ago by HVM
Good solution
Overall this product is good, the rope is cheap, would recommend buying a better quality rope, as the rope that comes in the kit is cheap and was coming apart. Read more
Published 1 month ago by Stephen
Bike Hanger
I own 4 of these and they all work great. I have had 2 of them for almost 10yrs with no problems. I highly recommend this product.
Published 2 months ago by Onliner
Woohoo! More garage floor space!
I love this thing! I use it to lift my son's bike up off the garage floor. It keeps it up and out of the way. SUPER EASY to follow instructions. Read more
Published 2 months ago by nerdyredneck
Works as Advertised
Simple to setup
took less than 30 min to mount and string
Mounted mine to a 3/4" piece of plywood as the ceiling joists were not where I needed to mount the lift... Read more
took less than 30 min to mount and string
Mounted mine to a 3/4" piece of plywood as the ceiling joists were not where I needed to mount the lift... Read more
Published 2 months ago by C. Ritchey
Tags Customers Associate with This Product(What's this?)Click on a tag to find related items, discussions, and people.
|
Customer Discussions
|
This product's forum
Active discussions in related forums
Search Customer Discussions
|
Related forums
|
![[Start the discussion]](http://g-ecx.images-amazon.com/images/G/01/x-locale/communities/discussion_boards/start-new-discussion-sec._V192250339_.gif){kind=small}
Listmania!
|
|
So You'd Like to...
Look for Similar Items by Category
|
