Frequently Bought Together
Product Details
Would you like to update product info or give feedback on images? |
Product Description
The RAM-B-166-AP8U, twist lock suction cup mount consists of a 3.25" suction cup locking base, socket system and custom high strength composite cradle for the Apple iPad. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your handheld device in your vehicle. High quality materials ensure your electronic device is safe, secure, and within easy reach. RAM’s patented design also dampens shock and vibration helping to extend the life of your mobile device. This mount is designed to hold the following devices: Apple iPad Wi-Fi 16GB, 32GB and 64GB Apple iPad Wi-Fi + 3G 16GB, 32GB and 64GB Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size
What Other Items Do Customers Buy After Viewing This Item?
Customer Reviews
Most Helpful Customer Reviews
41 of 41 people found the following review helpful
Amazon Verified Purchase
INTRODUCTION
I've been using my iPhone 4 with a mount to an air vent, but wanted to finally use the iPad (1st gen) in the car but could not find any iPad mounts on Amazon with decent reviews. I finally did a generalized internet search and then discovered that the brand RAM was reviewed favorably by an outside review website.
Luckily, Amazon does sell the RAM iPad mount and it has exceeded my expectations.
PROS
1. Very strong suction mechanism - The base of the suction is a rather strong, and large cylinder with a lever that one rotates to create a very powerful suction
2. Wide range of positioning possible in the 2 ball joints - There is a ball joint at the suction and another one attached to the iPad cradle which allow a very wide range of positions.
3. Extremely strong locking mechanism for both ball joints - There is a lock that one twists on the arm which will simultaneously lock the positions of both ball joints. The arm is made out of metal.
4. High quality plastic is used for the cradle/holster for the iPad which is very strong.
5. Fits iPad (1st generation) perfectly - If you have an iPad 2, there are two small rubber bumpers which you apply to the cradle/holster to allow for the thinner iPad 2 to fit.
CONS
1. You have to attach the cradle/holster to the arm with 4 screws and locking nuts (which are supplied) which took a little more effort than I expected. 1 of the locking nuts had a defect.
2. The arm is not long, which is reasonable considering the weight of an iPad, but it results in having your iPad close to your windshield. This may not sound like a significant problem, but it results in having a large percentage of your needed visibility obscured by the iPad, which looks gigantic when attached to your windshield.
CONCLUSION
This iPad mount is pure quality and awesome in its strength of suction. The construction uses joints made out of some sturdy material and a metal arm with a great locking mechanism. I have used it without it falling and even attached it to the moonroof so that it displays near the car ceiling so that backseat passengers can use it.
The greatest negative, is that the arm is probably necessarily short, causing the iPad to block what seems like a shockingly large part of your visibility. I never realized how large the iPad is until I saw it blocking my vision. Think carefully about how large the iPad is and try positioning it in your car behind some part of the front windshield and ask yourself if you can really tolerate this before purchasing this mount.
Otherwise, this is an excellent, high quality mount that actually works in holding up a large and relatively heavy iPad.
I've been using my iPhone 4 with a mount to an air vent, but wanted to finally use the iPad (1st gen) in the car but could not find any iPad mounts on Amazon with decent reviews. I finally did a generalized internet search and then discovered that the brand RAM was reviewed favorably by an outside review website.
Luckily, Amazon does sell the RAM iPad mount and it has exceeded my expectations.
PROS
1. Very strong suction mechanism - The base of the suction is a rather strong, and large cylinder with a lever that one rotates to create a very powerful suction
2. Wide range of positioning possible in the 2 ball joints - There is a ball joint at the suction and another one attached to the iPad cradle which allow a very wide range of positions.
3. Extremely strong locking mechanism for both ball joints - There is a lock that one twists on the arm which will simultaneously lock the positions of both ball joints. The arm is made out of metal.
4. High quality plastic is used for the cradle/holster for the iPad which is very strong.
5. Fits iPad (1st generation) perfectly - If you have an iPad 2, there are two small rubber bumpers which you apply to the cradle/holster to allow for the thinner iPad 2 to fit.
CONS
1. You have to attach the cradle/holster to the arm with 4 screws and locking nuts (which are supplied) which took a little more effort than I expected. 1 of the locking nuts had a defect.
2. The arm is not long, which is reasonable considering the weight of an iPad, but it results in having your iPad close to your windshield. This may not sound like a significant problem, but it results in having a large percentage of your needed visibility obscured by the iPad, which looks gigantic when attached to your windshield.
CONCLUSION
This iPad mount is pure quality and awesome in its strength of suction. The construction uses joints made out of some sturdy material and a metal arm with a great locking mechanism. I have used it without it falling and even attached it to the moonroof so that it displays near the car ceiling so that backseat passengers can use it.
The greatest negative, is that the arm is probably necessarily short, causing the iPad to block what seems like a shockingly large part of your visibility. I never realized how large the iPad is until I saw it blocking my vision. Think carefully about how large the iPad is and try positioning it in your car behind some part of the front windshield and ask yourself if you can really tolerate this before purchasing this mount.
Otherwise, this is an excellent, high quality mount that actually works in holding up a large and relatively heavy iPad.
13 of 14 people found the following review helpful
By J. Snow
I purchased this mount to use my iPad2 in my RV as both a digital road map and a GPS. This mount works great, my iPad2 fits perfect, safe and secure but still easy to remove if my wife needs it on her lap. As my windshield is high I also purchased a 3" RAM base mount to attach to my center console to place the iPad2 lower (and out of sight) and away from direct sunlight. This mount holds the iPad or iPad2 very securely with NO chance of it falling out in the event of speed bumps or a rough road. It allows me to swivel it from driver to passenger with no effort. If you have room for an iPad then you need this mount.
PS. Remember to REMOVE your iPad and place it out of sight EVERY time you exit your vehicle less you have a broken window and a missing iPad when you return. It only takes 30 seconds for a smash & grab and a $800 item is a very tempting target.
PS. Remember to REMOVE your iPad and place it out of sight EVERY time you exit your vehicle less you have a broken window and a missing iPad when you return. It only takes 30 seconds for a smash & grab and a $800 item is a very tempting target.
10 of 11 people found the following review helpful
By DBriggs
Amazon Verified Purchase
Besides wishing the extension arm was a little bit longer, this product is great. It securely holds my ipad, and makes it perfect for navigation and checking emails at red lights. MUST buy for anyone using their iPad in the car. I love it!
Most Recent Customer Reviews
5.0 out of 5 stars
Awesome
I use this for my iPad 3 in my Mustang while autocrossing. It never fell off once & I'm not sure what else would be a greater test of it's ability to cling to a windshield.
Published 8 days ago by T-Bone
5.0 out of 5 stars
GREAT THING
strong suction, well made, as it says you cannot use any kind of case with this mount FYI. that said it really a good product.
Published 19 days ago by nathan
5.0 out of 5 stars
Works great like all the RAM products
Works great like all the RAM products. I was using it for backup navigation with my ipad 2 when my primary went out. Saved me some trouble that day,
Published 1 month ago by BeachStranded
5.0 out of 5 stars
Take your iPad to local gym, and mount it on a treadmill, elliptical
This is strong as iron for my iPad. State of the art suction cup that would probably hold a MacBook. I mount this on the console. Read more
Published 1 month ago by B. Simon
5.0 out of 5 stars
A great mounting system.
I use this mount to secure an iPad3 to the windshield of a 2011 Toyota Prius and a 2012 oyota Highlander. Read more
Published 1 month ago by Bill Dodge
5.0 out of 5 stars
Flew with it yesterday.
I have a Vans RV8 and in rough weather is can be a bouncy ride. The RAM held the iPad in place. I was concerned that the suction cup would weak but it is very good. Read more
Published 1 month ago by DON STIVER
4.0 out of 5 stars
very good
very practical and lightweight for carrying in your briefcase flight and to use the ipad 3 in the plane ..... I recommend it 100%
Published 1 month ago by Cesar Olivera Doig
5.0 out of 5 stars
Works beautifully!
Although this was purchased as a gift, I received detailed feedback on how well this is working. It was intended to hold an iPad in a small motor home so the driver can use the... Read more
Published 1 month ago by Capt Nemo
5.0 out of 5 stars
Excelente
Se ajusta muy bien a mis necesidades de piloto para colocar el iPad en la cabina para la lectura de cartas y navegación
Published 2 months ago by José Alejandro Otero
3.0 out of 5 stars
It works
Very bulky but it works. To attach the iPad to glass or a glass like surface. I use it to mount my iPad in my ambulance when I'm sitting around. Read more
Published 2 months ago by StupidChild
