30% lighter than standard solid safety covers. Revolutionary new PVC coated polyester fabric features a 50% increase in tensile strength over a typical solid safety cover. Unlike mesh safety covers, this solid cover completely blocks the sunlight to prevent algae in your pool. Patented Klean-Screen center drain panel lets rainwater and snowmelt filter into your pool while it filters out debris. High strength Hyper-Light material stands up better to the wear and tear of harsh Winter weather, and features an increased snow load capacity for climates with heavy snows. Lighter weight makes this cover easier to install and remove in the Spring and Fall. Features newly upgraded Pull-Tite Commercial-Grade Stainless Steel Springs which boast nearly double the strength of other springs allowing you to install this cover tighter than a standard safety cover. Comes complete with screw-type brass anchors, springs, installation rod, easy to follow step-by-step instructions and a durable storage bag. Initial installation of anchors will require a rotary hammer drill and 3/4 inch drill bit. Cover is ASTM rated and has a break strength of 4,000 pounds. 15 year warranty.
YOUR POOL MUST MEET THE FOLLOWING REQUIREMENTS TO PROPERLY INSTALL A SAFETY COVER: pool is a perfect rectangle with square corners (not rounded) and NO step sections, there is at least 3 feet of concrete deck around the entire perimeter of the pool, and there are no unremovable objects (slides legs, handrails, ladders, dive stand, etc.) within 18 inches of the pool's edge. NOTE: If you purchase a standard cover to fit a custom pool (one that does not meet the requirements stated above) or purchase a cover that does not accommodate your specific pool size, the warranty for the cover will be void.
