Twelve 14K white gold filled small ring size adjusters. Ring not included.
Ring Size Adjuster Installation Instructions
1) Place the ring size adjuster next to your ring. The ring size adjuster is shaped so that the outer edges turn upward to match the existing contour of the ring.
2) Put the ring size adjuster inside the ring, setting the arms over the bottom of the ring band. Gently push down on the ring size adjuster so that it takes the same shape as the ring.
3) Tighten the ring size adjuster to the ring. Use smooth jaw chain nose pliers or smooth jaw needle nose pliers to avoid scratching your ring or the ring size adjuster.
4) Use the pliers to clamp down on one of the arms of the ring size adjuster once it's wrapped around the ring. This will tighten the ring size adjuster so that it won't slip.
5) Repeat the process for the other side of the ring size adjuster.
6) Adjust the size of the ring by pushing up or down in the middle of the ring size adjuster to find the fit that is most comfortable for you.
SMALL ring size adjusters usually fit children's rings & thin banded women's wedding or engagement rings.
HINT: Use smooth-jaw pliers to avoid nicking ring or ring size adjusters.
Ever wonder why white gold isn't as silvery as silver? We sure did.
White gold is not perfectly white. In some light white gold looks like silver or nickel, but may look slightly yellow in incandescent light. The color of gold is determined by the distribution of colors in the light that is reflected from its surface.
14-karat white gold is an alloy of gold, copper, nickel & zinc. The nickel & zinc reduce the red & yellow reflected by copper & gold, but is not perfect. Some reds & yellows are still seen.