| Warranty: | 1 year parts and laborand labor. |
Product Details
Would you like to update product info or give feedback on images?
|
![]() | Rockford Fosgate Punch Series SubsFeaturing innovative parabolic cone designs, oversized surrounds and large motor assemblies, Punch subwoofers deliver deep, loud, aggressive bass--not to mention stunning cosmetics that you'll want to show off. For over 20 years, Punch subwoofers have shown the world that big bass, extended power handling and awesome cosmetics need not cost a fortune. One listen and you'll know why it's called The PUNCH. |
Punch subwoofers deliver deep, loud, aggressive bass. Click to enlarge. |
Anodized aluminum voice coil formers provide excellent heat dissipation. Click to enlarge. |
Speaker Construction
Aluminum V/C Former
Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide excellent heat dissipation. Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous damand, not instantaneous power handling, that over time, can damage voice coils.
Reversible Mounting
Rockford Fosgate subwoofers can be mounted in either direction. A removable trim ring can be installed on the back or front side of the subwoofer frame. This gives the subwoofer a finished look regardless of mounting configuration.
Stitched Tinsel Leads
Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and strain over a greater area, significantly improving the reliability and performance of the subwoofer.
These stitched tinsel leads withstand extreme duty cycles, fatigue and high current that is critical to robust design.
Venturi-Effect Cooling
The "Venturi-Effect" is created by gradually reducing the air-flow exhaust path area, which increases the air speed across the key thermal masses ofthe speaker motor parts maximizing cooling effectiveness.
| Size: | 12" |
| Impedance: | 2-Ohm x 2 |
| Power Handling: | 500 Watts RMS 1000 Watts Max |
| Voice Coil Diameter: | 2.5" 4-Layer (6.35 cm) |
| Motor Size: | 102 oz. Double Stacked |
| Speaker Connector: | Dual 10 AWG compression |
| SPL(1w/1m): | 85 dB |
| Woofer Displacement: | 0.094 cu. ft. (2.66 Liters) |
| Cutout Diameter: | 11.25 in. (28.58 cm) |
| Mounting Depth: | 6.75 in. (17.15 cm) |
The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.
On a tighter budget? Consider the Prime Series R1S412.
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
6 of 7 people found the following review helpful:
5.0 out of 5 stars
great driver!,
By
This review is from: Rockford Fosgate Punch P3 P3D212 12-Inch 500-Watt Subwoofer - 2 Ohm (Electronics)
I have owned 2 P3d412 subwoofers for a year now and they are great! This system is really loud! with the volume turned all the way up, its almost difficult to breathe in the car. I have a rockford punch p1000-1bd amplifier powering the two(1259 watt). they are in a dual-ported enclosure. not only do they rattle your car apart, but the sound quality is great! hits the highs just as well as the lows. The dual voice coils really make it easy to wire however you wish. great, great, great! rockford really makes some high quality stuff! Next system=Rockford POWER series subs.
Ps: if you are running more than one of these subs, i would recommend buying a capacitor to keep your lights from dimming.
0 of 1 people found the following review helpful:
5.0 out of 5 stars
Nice,
By
Amazon Verified Purchase(What's this?)
This review is from: Rockford Fosgate Punch P3 P3D212 12-Inch 500-Watt Subwoofer - 2 Ohm (Electronics)
i had the dual bp whatevers the were in a band pass box with lights before that was my starter system i decided to upgrade so i bought a 12" p3 hooked it up in this custom fitted box for my truck and unhooked the two duals and i was suprised that one rockford out hit the two dual sadly tho when i hooked my duals back up they would cut out i dont know why i have a 1800 kenwood amp guess im not getting enough juice for the 3 of them oh well i took the duals out and i now have a back seat agin and still have a system that hits harder great buy thinking about getting anthor one when i get a compasitor and will need a box too
Share your thoughts with other customers: Create your own review
|
|
Suggested Tags from Similar Products(What's this?)Be the first one to add a relevant tag (keyword that's strongly related to this product).
|
|