Rockford Fosgate Punch 1000-Watt Mono Amplifier

by Rockford Fosgate

Product Details

User's Guide [2.62mb PDF]

• Product Dimensions: 8.1 x 9.9 x 14.9 inches
• Shipping Weight: 16 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• ASIN: B0012QD35K
• Item model number: P1000-1BD
• Average Customer Review: 5.0 out of 5 stars  See all reviews (1 customer review)
• Amazon Best Sellers Rank: #28,049 in Electronics (See Top 100 in Electronics)

Product Description

Amazon.com Product Description

With its super efficient Class-BD circuit topology, the P1000-1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.

Rockford Fosgate Punch Series Amplification For over 25 years, Punch amplifiers have set the standard in the car audio amplifier industry and they continue to do so today. It's the reason that they have become the most popular amplifiers in the world. Each of the Punch family amplifiers reproduce sonic perfection along with impressive power in a compact chassis.

---

Optimized for mid-bass speakers or subwoofers. Click to enlarge.

All connections are recessed into the amplifier's chassis and located on the bottom edge of the P1000-1bd, for a clean, uncluttered install that looks great in any car. Click to enlarge.

P1000-1bd Features

• 12dB/octave crossover
• 4 Gauge power/ground terminals
• Audiophile grade speaker connections
• Infrasonic filter
• MOSFET output stage
• MOSFET power supply
• RCA pass-thru
• Top Mounted LED Indicators

CEA-2006
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

Class bd
Rockford Fosgate bd topology is a revolutionary patented design, integrating a technology that is more efficient than typical class AB and has lower distortion than class D designs. POWER bd amplifiers are 75-80% efficient vs. 20-60% efficient class ab amplifiers. What does that mean? More power from your amplifier with less drain on your vehicles electrical and charging system.

Differential Inputs
Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts the voltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal to enter the amplifier.

DSM
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

Dynamic Thermal Management
Heat is often inefficiently dissipated across a heatsink causing "hot spots". Rockford Fosgate engineers have developed an award winning cooling design called DTM. This patent pending design seamlessly manages the output of power supply temperatures, while evenly distributing the excess heat across the entire amplifier.

MEHSA³
MEHSA³ (Maximum Efficiency Heat Sink Application--gen. 3) reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

NOMAD
NOMAD (Non Multiplying Advanced Decision) is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.

Punch EQ2
In the early 70's, Jim Fosgate studied the acoustical properties of automobiles. Utilizing a real-time analyzer and pink noise, he would graph out the acoustical characteristics of each car he tested. Jim discovered three problems that were common to all cars: a midbass hump between 100-275Hz, a steep roll-off of high frequencies from 2kHz up to 20kHz, and reduced bass response below 50Hz.

The Punch EQ on-board equalization circuit helps correct for these acoustical deficiencies in the listening environment. When set to Low-Pass(LP) operation, it becomes a variable Bass Boost. When set to High-Pass (HP) operation, it acts as a variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are boosted.

Rockford Fosgate Avatar
These Avatars are a personal signature from the Rockford Fosgate team member who designed and engineered this fanatic product. This statement illustrates Rockford's commitment to being Designed and Engineered in the U.S.A.

TO-247 MOSFETs
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps.

---

P1000-1bd Specifications

Number of Channels:	1
Rated Power:	250W x 1 @ 4-Ohms RMS 500W x 1 @ 2-Ohms RMS 1000W x 1 @ 1-Ohm RMS
Total Power:	1000 Watts
Dynamic Power:	--
Bridgeable:	No
Efficiency (average):	86% @ 4-Ohm 84% @ 2-Ohm 76% @ 1-Ohm
Crossover Controls:	Low-Pass (LP): 35-250Hz 24dB/octave Butterworth
Tone Controls:	Punch EQ2 Bass: 0dB to +18dB @ 45Hz Infrasonic Filter: Selectable 12dB/Octave, -3dB @ 28Hz
Signal Input:	Low level: 1 RCA pair
Signal Output:	Low level: 1 RCA pair
Power Input Connector:	Block
Power Wire Gauge:	4 AWG
Speaker Output Connector:	Screw terminal barrier strip
Speaker Wire Gauge:	8 AWG to 18 AWG
Heat Sink Type:	Cast aluminum
Cooling:	Convection
Remote Controls:	Optional PEQ Remote Punch EQ (overrides built-in Punch EQ2)
Visual Indicators:	Power Thermal Protect
Circuit Topology Class:	Class bd
Frequency Response:	20Hz to 250kHz +/- 0.5dB
Shipping Weight:	10.38 Lbs. (4.70 Kg.)
Dimensions (HxWxL):	2.25 x 7.625 x 14.375 (in) 5.71 x 19.37 x 36.50 (cm)

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Punch P1000-1BD 1000-Watt Mono Amplifier, User's Manual

---

More Amplifier Options From Rockford Fosgate

If you need more features, step up to the Power Series T1000-1BDCP.

On a Tighter Budget? Rockford's also got you covered. Consider the Prime Series R1000-1D.

---

Rockford Fosgate Punch Series Power Amplifiers

Rockford Fosgate Punch P200-2 200-Watt Stereo Amplifier	Rockford Fosgate Punch P300-1 300-Watt Mono Amplifer	Rockford Fosgate Punch P300-2 300-Watt Stereo Amplifer	Rockford Fosgate Punch P400-1 400 Watt Mono Amplifier
Rockford Fosgate Punch P400-2 400-Watt Stereo Amplifier	Rockford Fosgate Punch P400-4 400-Watt Multi Channel Amplifer	Rockford Fosgate Punch P500-1BD 500-Watt Mono Amplifer	Rockford Fosgate Punch P500-2 500-Watt Stereo Amplifer
Rockford Fosgate Punch P500-4 500 Watt Multi Channel Amplifier	Rockford Fosgate Punch P700-1BD 700 Watt Mono Amplifier	Rockford Fosgate Punch P1000-1BD 1000-Watt Mono Amplifer

Product Description

Rockford Fosgate 1000 Watt Mono amplifer with on-board adjustable crossover, gain control, and Patented Punch EQ. Amplifier features DTM Thermal management circuitry and MOSFET technology for clean performance that does not shut down. CEA Certified RMS Power Rating 250 watts x1 @ 4 Ohms, 500 watts x1 @ 2 Ohms, 1000 watts x1 @ 1 Ohms. Visit www.RockfordFosgate.com 24 hours a day for technical support or call [phone] M-F 7 am to 5 pm MST.

See all Product Description

Customer Reviews

Most Helpful Customer Reviews

3 of 4 people found the following review helpful:

5.0 out of 5 stars WHAT YOU'D EXPECT FROM A 1000 WATT ROCKFORD!, January 28, 2009

By 

C. Christou (Urbana,Maryland) - See all my reviews
(REAL NAME)   

This review is from: Rockford Fosgate Punch 1000-Watt Mono Amplifier (Electronics)

I've owned many Rockford amps and this is no exception to any of them. It's loud as heck you can hear me coming in my car from far away at just a little over half gain! I have 2 12" Infinity Kappa Perfect 4-ohm subs to this amp and the subs can't handle more than a little over half the gain of this amp. It still rocks and you get the Rockford clarity and punch you'd expect from any Rockford amp. I also have the same model amp but 300-1 which handled my Infinity's perfect. Im about to order 2 12" Rockford P3's within the next few days and THAN IT WILL BE ON!! Perfect subs for this brute amp! I'll be ordering the P3's from Amazon.com like I do everything else and than i will post my review about those subwoofers with this amp. I CANT WAIT!