Customer Reviews

Rockwell RW9123.3 Sonicrafter 1-3/8-Inch Precision End Cut Blade, 3-Piece

5 star:		(23)
4 star:		(3)
3 star:		(1)
2 star:		(0)
1 star:		(0)

 

 

This blade was just what I needed to cut some damaged framing around my garage doors. The blade that came with the Rockwell Sonicrafter worked OK, but I needed a more agressive blade to cut the hard yellow pine and this blade did a beautiful job.

Still on the first blade and it cut through some cheap cabinet wood and 4-5 door jambs. It seems to be doing fine. The teeth on the blade are much larger than the universal blade by .3 mm (they don't really look comparable).

i love this tool, i am custom cabinet maker and installer, and just bought this item, i wish i would have had it ten years ago, i had a space with a postform countertop backsplash that i could not cut with any other tool, this one did the job, i cant wait for the new blades to come in , i have the universal, and it worked great, i ordered the precision end blades and they appear to have more aggressive teeth,...should work even better, as long as you seat the blades properly, and square the allen wrench all the way in till its seats squarely in the tightening screw,...you shouldnt have a problem as the other reviews suggest!!!!

It has been one of the best tool I added to my set. I am a kitchen installer we do multiple units in large buildings and use this tool primarily to cut out backsplash outlets, and sinks for the countertop.. Its really awesome and easy to use would recommend for all contractors! So much better then the rotozip!

The SonicCrafter is everything it said it was. Light, powerful, easy to use and cuts a beautiful perfect notch in hard to reach places. I install TV built in niches and media centers and use it to cut out electric face plates and access squares for cables etc. Works perfectly. I suggest practice on a scrap piece of wood a couple times to get the feel of it and you will be a pro. [...]

I am very satisfied with both my sonicrafter and its accessories but feel the blades and accessories are too expensive. I am refurbishing an older home that was built with quality lumber and other products. I have gone through more blades than I feel I should have, especially when your paying $30.00 to $40.00 for blades. I purchased 7 1/4 inch Irwin circular saw blades, at my local Do It Best Hardware store on sale for $2.99 a blade, the Rockwell Blades seem to be excessive.

Item as described. Would purchase again. Could be cheaper, but you can say that about everything these days.

These blades are what you need to cut wood. They are much better than the fine tooth blades that come with the tool. Great for undercutting moldings before installing tile or hardwood.

Brought the Precision end cut blade in US and brought it over to india so never knew how this tool and its blades would stand against the hardwood. Used it to Cut Hardwood plywood and Teakwood wooden beam( 1.5 inch X 3 inch X 24 inch Length). Worked perfectly. Only problem i identified was that you need to really tighten the wood to the vice so that the blade can cut thru the wood. If the wood is loose then it will take longer to cut. Best part was even after using it continuously for 15 mins the blades do not get hot.

The end cut blade has performed Well on all my projects. I highly recommend it.