New from Rowenta, the DW9080 steamium iron with new steam force technology. The steam force technology is a new pump injection technology that forces steam into the fabrics; pushing 30-percent more steam into the heart of the fabric. High performance steam for efficient ironing; steam on demand with ergonomically designed trigger; one touch temperature setting/led display; one touch controls for ideal steam and temperature selection; steam output is automatically adjusted based on fabric selection; fabric selection on front of iron for maximum visibility and control; led display at forefront of iron for easy temperature selection and monitoring. Loaded with features, the DW9080 steamium iron has the following: 3-way smart automatic shut off-switches iron off in 8-minutes if left vertically, 30-seconds if left horizontally, 30-seconds if tipped over. An easy to fill, large 10-4/5-ounce water tank ; 1800watts of power provides a powerful vertical steam-allowing the iron to be used in an upright position to remove wrinkles from hanging garments; burst of steam-producing effective wrinkle removal from difficult fabrics and variable steam-allowing steam output to be adjusted in demand. The cool spray mist provides a light mist to remove stubborn wrinkles. The microsteam 400 platinum precision soleplate is stainless steel coated with ultra-thin silicate coating; platinum soleplates have a tougher, smoother surface with excellent non-stick and scratch resistant properties. The high precision tip on the soleplate is perfect for hard to reach areas. The anti-drip system helps prevent spitting and leaking when thermostat is on a low setting. The self clean system flushes out loose mineral deposits ensuing optimal performance. The integrated anti calc system will extend the life of the iron. The iron has a 7-feet electrical cord with 360-degree pivot, it has a handle that is ergonomically designed for maximum comfort and comes with a 1-year warranty.
Note: The steam iron would take 45 seconds to heat up.
Instruction to be followed:Open the water inlet and fill the water tank with tap water Close the water inlet Plug the iron An orange light turns on at the base of the handle, meaning the iron is heating up Adjust the thermostat by selecting the type of your garment Meanwhile the screen indicated you what you have selected , in green When the orange light turns off, the iron is ready to go Press the trigger below the handle to get continuous steam on your fabric Use the extra burst of steam or spray, 2 bottoms on the top of the handle if needed While the work is finished, unplug the iron and empty the water tank for long lasting product Wait until the soleplate is cooling down before storing your iron